This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A series of traffic-related calls kept Rock County public safety units busy throughout the afternoon of May 23, 2026, beginning around 3:05 p.m. and stretching past 4:00 p.m. Scanner traffic indicated multiple separate vehicle concerns across the county, including a weaving driver, a stalled or abandoned vehicle blocking a roadway, and a reported tire crash.
Weaving Vehicle on Parker On-Ramp
The afternoon’s traffic activity began when dispatchers reported a vehicle weaving on the on-ramp from Parker heading toward Memorial at approximately 3:05 p.m. Scanner traffic indicated the vehicle was traveling westbound, and a unit was noted as being assigned to the call. According to scanner traffic, there was some uncertainty early on as to whether any unit was still with the vehicle at that point.
At approximately 3:08 p.m., scanner traffic referenced contact regarding a title for a JOPP in connection with an accident, suggesting a potential collision or traffic enforcement matter was being addressed in the area. Shortly after, at 3:09 p.m., dispatchers indicated that if a subject was not located at the initial scene, units were expected to begin checking toward a nearby park, where the subject or a vehicle may have been located.
Vehicle Stop and Speedway Diesel Pumps Contact
Around 3:30 p.m., scanner traffic indicated information was being relayed regarding a vehicle stop. At approximately 3:39 p.m., a vehicle was reported in a parking lot near Route 8, and by 3:41 p.m., units confirmed they had that vehicle on scene. At 3:47 p.m., a unit identified as Unit 23 reported being out with a vehicle at the diesel pumps of a Speedway location, according to scanner traffic.
Vehicle Blocking Road on Pulmer
At approximately 3:58 p.m., dispatchers reported a vehicle stopped in the middle of the road on Pulmer, with other drivers swerving to avoid it. Scanner traffic did not indicate whether the vehicle was occupied, disabled, or involved in a prior collision. No injuries were reported over the scanner in connection with this call.
Tire Crash and Riverside Park Vehicle
Shortly after 4:00 p.m., scanner activity continued to escalate. At 4:14 p.m., scanner traffic indicated a unit identified as Unit 2236 was en route on Route 206 and was asked to proceed with traffic details. At 4:16 p.m., a full tire crash was reported, according to scanner traffic, though no further details regarding location or injuries were broadcast at that time.
At 4:19 p.m., a separate call came in reporting a vehicle at Riverside Park near the historic boat launch area. By 4:22 p.m., a unit reported being on scene and handling traffic at that location, according to scanner transmissions.
Scene Status
Scanner traffic did not confirm whether all scenes were cleared as of the final transmissions monitored. No injuries were publicly reported over the scanner in connection with any of the calls. The Rock County Sheriff’s Office and local units appeared to be managing multiple simultaneous traffic-related calls throughout the afternoon, based on scanner traffic.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

