This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A series of traffic stops unfolded across Rock County in the early morning hours of Saturday, July 11, 2026, with scanner traffic indicating law enforcement activity spanning multiple jurisdictions — including Milton, Janesville, Beloit, and unincorporated areas of the county — beginning at approximately 5:17 a.m. and continuing past 6:00 a.m.

Early Morning Activity Begins Countywide

Scanner traffic first indicated a traffic stop at 5:17 a.m., with a Rock County unit identified as 548 initiating the contact. Shortly after, dispatchers were heard advising that two additional stops could be cleared with warnings, suggesting at least three separate traffic contacts were active or recently concluded in the opening minutes of the incident window.

At 5:21 a.m., scanner traffic referenced a road with an “all traffic” advisory, though the specific roadway name was not clearly captured in transmissions. A unit identified as 5-27 initiated another traffic stop at 5:29 a.m., according to scanner audio.

Milton and Highway 14 Stops

At 5:34 a.m., dispatchers reported a traffic stop in the City of Milton, noting it involved a vehicle and indicating the stop fell under the Madison Division. A unit advised dispatchers they would provide the truck information in a moment, scanner traffic indicated.

By 5:38 a.m., scanner traffic indicated another stop on Highway 14 involving one subject and a vehicle. No further details regarding the outcome of that stop were broadcast on the scanner.

Mid-Morning Contacts Continue

Between 5:58 a.m. and 6:05 a.m., scanner traffic reflected a busy stretch of activity across the county. Units identified as 4-02 and 48 each initiated traffic stops at 5:58 a.m. and 5:59 a.m., respectively, according to dispatchers. A vehicle stop in the City of Janesville, Wisconsin was reported at 6:00 a.m., followed by an additional vehicle contact logged at 6:03 a.m.

At 6:05 a.m., scanner traffic included a 10-4 acknowledgment alongside a 10-50 code, which in Rock County communications typically references a traffic accident or collision, though no further details about injuries, damage, or location were broadcast in connection with that transmission.

Beloit Stop Involves Illinois Plate

At 6:08 a.m. and again at 6:12 a.m., units identified as 4-5 and 4-2 initiated additional traffic stops, according to scanner audio. The final traffic contact captured in scanner transmissions occurred at 6:12 a.m. near Prairie in Beloit, where dispatchers reported a vehicle stop involving a vehicle displaying an Illinois license plate. No further information regarding the outcome of any of the individual stops — including whether citations were issued, vehicles were towed, or subjects were detained — was broadcast on the scanner beyond what is noted above.

Multiple Units, Multiple Jurisdictions

Scanner traffic indicated involvement from Rock County Sheriff’s Office units as well as agencies operating in the City of Milton, City of Janesville, and City of Beloit throughout the roughly one-hour window. No injuries were reported over the scanner in connection with any of the traffic stops, and no scene was described as remaining active in final transmissions captured.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.