This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville and Rock County units responded to a suspicious vehicle report in the early morning hours of Saturday, August 22, 2026, beginning around 4:03 a.m., after a caller flagged a vehicle tracked to McKinley Street in Janesville, according to scanner traffic.

How the Call Came In

Scanner traffic indicated the initial report came in at approximately 4:03 a.m., with dispatchers noting that the vehicle had been tracked to McKinley Street in Janesville. According to scanner traffic, the caller was a subject who reported the vehicle on behalf of another party. Dispatchers indicated that the reporting party might be located near Milton Avenue, and that units might need to contact the caller directly for additional information.

White Sedan Observed Driving Slowly Through Neighborhood

At approximately 4:36 a.m., Rock County dispatchers broadcast a description of the vehicle in question, identifying it as a white sedan. Scanner traffic indicated the vehicle was observed driving through a neighborhood at a very slow rate of speed — approximately 8 to 10 miles per hour — raising concern among those who reported it.

Shortly after, at approximately 4:46 a.m., scanner traffic referenced the vehicle again, with dispatchers indicating it was described as being located directly in Rockville, though further details on that location were limited in the available scanner audio.

Units Respond Across Agencies

At 4:24 a.m., a county-wide traffic advisory was broadcast, with Rock County dispatchers calling all available vehicles — both male and female units — to a status of 10-18, indicating they were en route or to respond urgently, according to scanner traffic.

Scanner audio at 5:07 a.m. referenced movement near rear doors and traffic activity at the front of a location, though the specific address was not clearly identified in the available transcript. At 5:10 a.m., dispatchers broadcast a 10-5 and 10-50, codes that scanner traffic indicated were associated with ongoing traffic-related activity. A final traffic reference was logged at 5:20 a.m.

Scene and Investigation Status

Based on the available scanner transcript, it was not immediately clear whether the white sedan was located or its occupants contacted by responding units. No injuries were reported in scanner traffic, and no further details regarding the outcome of the response were broadcast during the monitored period. The scene status — whether cleared or still active — could not be confirmed from the available scanner audio alone.

608scanner.com will continue to monitor Rock County scanner traffic for any updates related to this incident.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.