This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A structure fire on McKinley Avenue in Janesville drew a multi-unit emergency response Sunday evening, June 28, 2026, with dispatchers reporting at least one person inside the building attempting evacuation when the call came in just before 7:00 p.m.
Initial Report and Response
Janesville Fire dispatchers broadcast the call at 6:57 p.m., reporting a structure fire at McKinley Avenue with one person inside who was attempting to evacuate, according to scanner traffic. Rock County units were also heard being directed to post on the fire shortly before the formal dispatch, with one unit noting the presence of what was described as possible smoke, though the transmission indicated uncertainty, with the unit comparing it to cigarette smoke and stating they were “not entirely sure.”
Unit Fire 143 was heard on scanner traffic confirming arrival on scene at 7:03 p.m., approximately six minutes after the initial dispatch.
Second Alarm: North Franklin Street
While units remained active at the McKinley Avenue fire, a second fire-related call was dispatched at 7:16 p.m. Scanner traffic indicated Janesville Fire was responding to a structure alarm at North Franklin Street, described as a fire alarm activation with an evacuation in progress at that location.
Scene Operations
At approximately 7:18 p.m., scanner traffic indicated that crews were reporting nothing showing from three sides of the structure and requested information on evacuation progress. A command presence was established, with a transmission referencing command on the outside and units switching to a fire channel.
A unit identified as McKillock Command was heard checking in via Rock County radio at 7:40 p.m., scanner traffic showed. Additional transmissions at 7:32 p.m. referenced units going to fire light, and Rock County fire traffic at 7:37 p.m. referenced Troop 41 with a delay to Rock County Memorial, though the context of that transmission was not entirely clear from scanner audio.
Transport to Mercy Hospital
At 8:16 p.m., a unit identified as Rock County Fire 2-41 was heard on scanner traffic reporting it was transporting a patient to Mercy Hospital. The nature or severity of the patient’s condition was not specified in the scanner traffic. An ambulance unit was also referenced in Rock County fire radio traffic at approximately 8:10 p.m.
By 8:28 p.m., scanner traffic indicated that unit Q41 had arrived at the hospital, with a transmission confirming its status.
Agencies Involved
Scanner traffic reflected coordination between Janesville Fire and Rock County emergency services throughout the incident. Multiple unit designations were heard, including Fire 143, Troop 41, unit 2-41, and Q41, according to scanner audio. The scene status had not been formally declared cleared in the available scanner traffic.
608scanner.com will continue to monitor this story as additional information becomes available.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

