This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville and Rock County fire units responded to a structure fire in Janesville on Thursday, September 24, 2026, with scanner traffic first indicating the call at approximately 2:24 p.m. At least one patient was transported to a local hospital during the response, according to scanner communications.

Initial Response

Janesville fire dispatchers reported a structure fire at shortly before 2:41 p.m., according to scanner traffic. Rock County fire units acknowledged the call at 2:24 p.m., with additional radio traffic logged at 2:41 p.m. indicating a phone overlay was established, scanner communications showed. The specific address of the fire was not clearly broadcast in available scanner traffic.

Units Responding

Multiple units were heard responding throughout the afternoon. Scanner traffic at 2:53 p.m. indicated unit 491 was en route to the scene. Unit 344 was also among those active at the location, according to dispatcher communications. Additionally, unit 142 was heard en route at 3:29 p.m., scanner traffic indicated, suggesting the response remained active well into the afternoon hours.

Patient Transported to Mercy Hospital

At approximately 2:54 p.m., scanner traffic indicated that unit 344 was transporting at least one patient to Mercy Hospital. The nature or severity of any injuries was not clearly conveyed in available scanner communications. No further details regarding the patient’s condition were broadcast on the scanner frequency monitored.

St. Mary’s Also Referenced

Scanner traffic at 3:22 p.m. indicated that unit 442 was at St. Mary’s, though the context of that transmission was not entirely clear from available scanner communications. It was not determined from the transcript whether that reference involved an additional patient transport or another matter related to the incident.

Scene Activity and Units Clearing

Scanner traffic at 3:12 p.m. indicated that unit 344 had completed search and rescue operations, described in the transmission as “S&Rs,” according to dispatcher communications. By 3:47 p.m., scanner traffic confirmed that unit 344 had returned to quarters, with the transmission indicating the unit was “back in house.” Additional Rock County fire traffic was logged at 3:02 p.m., though that transmission was incomplete in available scanner audio.

The cause of the structure fire was not referenced in scanner communications. No further details regarding the extent of damage to the structure were broadcast on the frequencies monitored by 608scanner.com.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.