This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville firefighters responded to a structure fire at the Woodside Terrace apartment complex Wednesday evening, with scanner traffic first reporting the call at 6:26 p.m. on September 2, 2026. Dispatchers described the incident as a commercial fire with heavy smoke conditions inside the building.

Initial Response

According to scanner traffic, Janesville Fire Department units were dispatched to the Woodside Terrace apartment complex shortly after 6:26 p.m. Dispatchers noted there was a significant amount of smoke in the building at the time of the initial report. Multiple Rock County fire units were heard responding to the scene in the minutes that followed.

Scanner traffic indicated that by approximately 6:40 p.m., some units were being sent back to quarters, suggesting initial crews on scene had begun to gain a handle on the situation. A unit identified as Rockfire 311 was heard clearing the scene by 6:48 p.m.

Alarm Issues Complicate Response

Dispatchers reported at approximately 7:00 p.m. that the building’s fire alarm had been silenced, though scanner traffic indicated alarms were expected to continue sounding. According to dispatchers, after-hours maintenance for the complex had been contacted and a representative was en route to the scene.

By 7:25 p.m., dispatchers downgraded the call, instructing units to treat it as a special duty assignment with only one unit — identified as unit 113 — remaining on scene. The reason given was that the fire alarm had failed to reset. Scanner traffic confirmed that Battalion 131 was released and able to return at that time.

Extended Scene Activity

Despite the downgrade, scanner traffic indicated fire units remained active at the scene well into the evening. Additional units were heard arriving at approximately 7:54 p.m. and again at 8:04 p.m., with scanner traffic placing units on scene as late as 8:16 p.m. At 8:13 p.m., a unit on scene was heard stating that conditions inside appeared clear and that crews were going to attempt to reset the fire alarm.

At 8:21 p.m., scanner traffic referenced a fire alarm at a structure, though the specific address was not clearly audible in the transmission. It was not immediately clear from scanner traffic whether this represented a new alarm activation at the same location or a separate call.

No Injuries Mentioned

Scanner traffic made no reference to any injuries, fatalities, or medical transports in connection with the fire at Woodside Terrace. No investigators were reported as being called to the scene based on available scanner traffic. The cause of the fire was not discussed in transmissions monitored.

The call remained active in scanner traffic through at least 8:21 p.m., nearly two hours after the initial dispatch. It was not immediately clear from available transmissions when the scene was fully cleared or whether the building’s fire alarm system was successfully reset.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.