This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A series of traffic crashes and storm-related hazards kept Rock County and Janesville public safety units responding across the region on the afternoon of Wednesday, June 10, 2026, with activity beginning around 1:40 p.m. and extending into the early afternoon hours, scanner traffic indicated.

Storm Warnings and Initial Crash Reports

Scanner traffic at approximately 1:40 p.m. indicated a high-priority car accident was underway, with multiple vehicles involved and cleanup operations beginning in the area of 500-world, according to dispatchers. Shortly after, at 1:41 p.m., Janesville dispatch warned of considerable damage expected to vehicles, with tree damage and power outages described as likely. Dispatchers noted the locations impacted included both Janesville and Beloit.

Multiple Vehicle Crashes Reported

Throughout the early afternoon, Rock County dispatchers repeatedly referenced vehicle-related calls. Scanner traffic at 1:55 p.m., 1:57 p.m., and 2:03 p.m. indicated units were directed to vehicle locations, with one transmission referencing a GPS location for a vehicle. The nature and precise locations of those individual calls were not fully discernible in scanner traffic.

At 2:39 p.m., Rock County units broadcast radio codes consistent with accident-related traffic — with multiple 10-50 codes, the standard Rock County signal for a traffic accident, transmitted in succession, according to scanner traffic.

Janesville Fire Deploys for Traffic Control

At 2:36 p.m., Janesville Fire was heard on scanner directing traffic control on reverse central for the duration of the storm. Rock County dispatch marked that transmission clear at 1436 hours. Scanner traffic at 2:37 p.m. from the Milton channel indicated a reference to Milton Memorial and a traffic-related situation, though details were limited in available scanner audio.

At 2:38 p.m., Rock County dispatchers indicated units had been sent to provide accident aid, scanner traffic showed.

Fence Strike on River Road

At 2:52 p.m., Rock County dispatch broadcast a report of a vehicle involved in a fence strike on River Road, according to scanner traffic. Dispatchers noted no injuries were reported in that crash, but indicated that multiple people had stopped at the scene. Units acknowledged the call with 10-50 codes at 2:53 p.m.

Continued Activity Through Mid-Afternoon

Scanner traffic at 2:25 p.m. referenced Rockford Engine 813 and appeared to involve communications related to traffic management, though the full context was unclear from available audio. Additional radio traffic at 2:50 p.m. indicated dispatch was in contact with area units. Further 10-50 codes were broadcast at 3:08 p.m., and at 3:10 p.m. a unit was heard routing to a location referenced as 31 in route, Rosamois, according to scanner traffic.

Rock County dispatch indicated the scene was cleared at 1436 hours for at least one of the active calls, scanner traffic showed. The overall status of remaining calls was not confirmed in available scanner audio.

No serious injuries were confirmed in scanner traffic for any of the reported crashes. No investigators were mentioned as being called to any scene based on available transmissions.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.