This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A fire near the Rock River brought multiple emergency units to the scene late on the night of July 3, 2026, with three patients ultimately transported to Mercy Hospital, according to scanner traffic monitored by 608scanner.com.

Fire Reported, Command Established

Scanner traffic first indicated fire activity at 11:46 p.m., with a transmission referencing units in the area. By 11:51 p.m., Rock County dispatchers were heard confirming radio contact and checking on the status of responding crews. At 11:54 p.m., unit Rock Fire 312 reported on scene at the Rock River area, according to scanner traffic. The unit identified the location as near a leisure-area designation, established command, and requested a second ambulance be dispatched from Station 34, dispatchers indicated.

Three Patients Transported to Mercy

Just after midnight, at approximately 12:15 a.m. on July 4, scanner traffic indicated that Rock Fire units were transporting three patients to Mercy Hospital. The nature and severity of the patients’ conditions were not detailed in scanner transmissions. No further information about the patients was broadcast over public safety channels.

Separate Intrusion Alarm Draws Response

While fire units remained active, a separate call came in at 12:26 a.m. for an intrusion alarm, scanner traffic indicated. Units identified in transmissions as 424423 arrived at the alarm location and reported an audible alarm sounding from inside the building while they checked the exterior, according to dispatchers. By 12:36 a.m., a unit identified as 42 or 44 was advised that the alarm company had not provided keyholder information and that no keyholder data was available in the system, scanner traffic indicated. Further transmissions at 12:38 a.m. referenced the alarm status, with one transmission noting that two zones were being assessed — one closed and one a check. A subsequent transmission indicated the alarm had been covered and asked the unit to go again. At 12:42 a.m., scanner traffic referenced a possible cause related to a triggering alarm zone, though the transmission was difficult to discern clearly.

Additional Units Requested, Fire 312 Redirected

At 12:46 a.m., unit 349 contacted Rock Fire dispatchers and requested that unit 343 be dispatched to what was described as a fall, according to scanner traffic. One minute later, at 12:47 a.m., scanner traffic indicated that Rock Fire 312 — the same unit that had established command at the earlier fire scene — was also responding to a location referenced as East Road 8, dispatchers reported.

Scene Status

Scanner traffic did not include a formal all-clear or scene closure announcement for either the fire or the intrusion alarm within the monitored timeframe. The cause of the fire was not discussed in any scanner transmissions, and no investigators were specifically mentioned as being called to the scene. The Rock County Fire Department and associated units were the primary agencies heard on scanner traffic throughout the incident.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.