This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County public safety units responded to a series of traffic-related calls and at least one reported attempted break-in over a roughly three-hour period beginning at 11:32 a.m. on Tuesday, August 4, 2026, according to scanner traffic monitored by 608scanner.com.

Early Traffic Activity and Fire Dispatch

The first transmission was logged at 11:32 a.m., with dispatchers referencing traffic on an emergency frequency and noting the need to allow for it. Shortly after, at 11:32 a.m., Rock County Fire was dispatched to a 10-50, the radio code used to indicate a traffic accident, scanner traffic indicated.

By 11:37 a.m., a unit identified as 1-21 was heard requesting information related to a domestic violence traffic stop, though scanner traffic indicated the signal was partially lost and the full details of the request were unclear.

Attempted Break-In Reported on Milwaukee Road

At 11:42 a.m., scanner traffic indicated a call from the Inman area, with dispatchers referencing a location on Milwaukee Road. According to the transmission, subjects had reportedly attempted to break into a back door of a vehicle or structure at that address. Further details regarding the outcome of that call were not available in scanner traffic.

Also at 11:42 a.m., a separate transmission referenced traffic in the area of Point Road, though no further details were broadcast on the scanner.

Afternoon Traffic Calls and Vehicle Stop

At 11:45 a.m., a unit confirmed a 10-50 by phone, scanner traffic indicated. Additional traffic transmissions were logged at 11:56 a.m. and 12:02 p.m., with units identified as 43 and 3-3 respectively checking in on the channel.

At 12:22 p.m., dispatchers broadcast a series of codes — 10-50, 10-30, 11-68, and 12-50 — along with a reference to a safe, though the context and location of that transmission were not made fully clear in scanner traffic.

At 12:26 p.m., scanner traffic referenced a vehicle that had been in front of a store, though no address or store name was broadcast.

Vehicle Stop and Plate Checks

At 12:31 p.m., a unit reported a vehicle had been pulled over, with scanner traffic indicating the subjects appeared to have nearly been involved in a collision. The transmission included partial plate numbers — referenced as 4-5-6 and 4-5-5-6 — though the dispatcher indicated difficulty receiving the information clearly. A reference was also made to a repeat device, though scanner traffic did not clarify the nature of that reference.

At 12:34 p.m., a unit was heard requesting information on a couple of vehicles and asking dispatch to return results. At 12:35 p.m., a traffic complaint was logged under unit 537, and an additional plate check request was broadcast.

Scene Status

Scanner traffic did not indicate whether any of the scenes were cleared, whether any injuries were reported, or whether any subjects were taken into custody in connection with any of the calls. Investigations into the reported attempted break-in on Milwaukee Road and the traffic stop were not confirmed as concluded in available scanner traffic.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.