This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County emergency units responded to a structure fire Monday, August 3, 2026, with scanner traffic first reporting the blaze shortly before noon and activity continuing for approximately one hour.

Initial Report

At 11:58 a.m., Rock County dispatch traffic indicated a structure fire was underway, with a dispatcher noting, “This is a structure fire, too,” suggesting additional calls may have been active simultaneously. Also at 11:58 a.m., Janesville Fire was separately dispatched to a medical call in the Commercial Drive area, according to scanner traffic, indicating multiple units were engaged across the county at the time.

Units Responding

Scanner traffic throughout the incident referenced Rock County fire units, including a unit identified as Rock Fire 3-4-2, which was heard on radio traffic at approximately 12:35 p.m. and again at 12:58 p.m. At 12:25 p.m., a transmission was heard advising a unit that there was “fire at your back,” suggesting active fire conditions were present at the scene at that time, according to scanner audio.

Medical Transport

At 12:58 p.m., scanner traffic indicated that Rock Fire unit 3-4-2 was en route to Mercy, suggesting at least one individual may have required medical attention in connection with the incident. No further details about the nature or severity of any injuries were broadcast over scanner frequencies.

Additional Activity

At 12:46 p.m., a transmission referenced what dispatchers described as involving a subject, with a mention of “ATS 51-20” — a designation whose meaning was not made clear from available scanner audio. At 12:57 p.m., a separate transmission referenced a campfire, though it was not clear from scanner traffic whether this was related to the structure fire or represented a distinct call.

Scene Status

Scanner traffic at 12:17 p.m. included a transmission indicating that fire units would be “concerned at that,” though the full context of the communication was unclear from available audio. No all-clear or scene-secured transmission was captured in the available scanner transcript. It was not possible to confirm from scanner traffic alone whether the fire was fully extinguished or whether investigators were called to the scene.

The exact address of the structure fire was not broadcast in the available scanner transmissions. 608scanner.com will update this report as additional information becomes available.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.