This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire units were engaged in a series of calls beginning early Friday morning, June 12, 2026, with scanner traffic indicating activity that stretched from approximately 9:44 a.m. through the early afternoon hours, involving multiple agencies and a range of reported situations across the county.
Early Morning Fire Response
Scanner traffic beginning at 9:44 a.m. indicated Rock County fire units were being dispatched, with dispatchers referencing a location identified as A45 and unit designations including 21-5. Around the same time, Rock County fire was directed to change communications to an emergency channel for the response, according to scanner traffic.
By 9:47 a.m., dispatchers were heard directing fire units to proceed, with all available units instructed to continue toward the scene. Follow-up traffic at 9:49 a.m. referenced Rock County fire and what dispatchers described as courts in connection with the response.
At 9:51 a.m., scanner traffic indicated a unit identified as 31 was on scene. By 10:00 a.m., unit 831 was reported clear from the location, and at 10:14 a.m., dispatchers referenced unit E13 in connection with the ongoing fire assignment.
Additional Units and Welfare Check
At 10:21 a.m., scanner traffic indicated another unit had been calling on the fire communications setup, with dispatchers acknowledging the transmission. Shortly after, at 10:22 a.m., Janesville fire dispatchers were heard reporting engines were returning to quarters following a separate call on Madison Street.
At 10:33 a.m., Rock County scanner traffic indicated a fire engine had finished and was available, described as operating with the system only. By 10:46 a.m., dispatchers reported no violations had been found and that a subject had been accounted for in connection with the fire response.
At 11:13 a.m., Rock County dispatchers reported a welfare check connected to the fire activity had been cleared with no transport required.
Patient Transport and Smoke Report
At 11:38 a.m., both Beloit fire and Rock County dispatchers reported that a patient described in connection with a freight truck was being transported to Mercy Parkway, according to scanner traffic. The nature of the patient’s condition was not specified in scanner transmissions.
At 12:05 p.m., Rock County dispatchers indicated unit 442 had finished and was returning. Shortly after, at 12:07 p.m., scanner traffic noted a report of a suspicious noise near power lines, with a puff of smoke observed in the area. Dispatchers indicated no flames were visible and that power remained on at the location.
Shots Fired Report Near Rockport Creek
At 12:38 p.m., Rock County scanner traffic referenced unit designations 25-20-5 and a report of shots fired at Rockport Creek, according to dispatchers. At 12:40 p.m., scanner traffic indicated units were on scene at that location. The connection, if any, between the shots fired report and the earlier fire-related activity was not established in scanner transmissions.
By 12:30 p.m. and again at 12:40 p.m., Rock County dispatchers were heard wrapping up fire-related communications, with units reporting on scene. No further details regarding injuries, structure involvement, or the origin of the fire activity were broadcast over scanner during the monitored period.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

