This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire and law enforcement units responded to a series of fire-related calls throughout the morning and midday hours of July 8, 2026, including a reported structure fire at a mega warehouse, a chemical activation alarm, and multiple automatic fire and panic alarms across the county, scanner traffic indicated.
Early Morning Response
Scanner traffic indicated the first fire-related activity began around 9:14 a.m., with a request for fire assistance. Unit 342 was reported en route by 9:15 a.m. and on scene shortly after at 9:16 a.m., according to dispatchers. A possible medical call was also noted in connection with the early response, with units responding to Interstate 15, scanner traffic indicated.
By 9:26 a.m., dispatchers directed unit 313 en route to Stiltbrook, and around 9:28 a.m., scanner traffic indicated a caller had hung up in connection with one of the fire calls. Unit 3-12 was heard returning to quarters by 9:50 a.m.
Chemical Activation and Panic Alarms
Around 9:39 to 9:42 a.m., scanner traffic indicated multiple overlapping calls, including automatic residential panic alarms, a fire alarm, and a dispatch for a fire alarm with a chemical activation, with law enforcement also reported as responding. A unit identified as 747 was noted responding to a location on 70 Road, with dispatchers describing two panic alarm activations and a fire alarm at that address.
RTD also received a call for a panic alarm during this period, according to scanner traffic.
Beloit Business: Anhydrous Tank
At approximately 10:24 a.m., Beloit fire, EMS, and fire units were dispatched to a business on Delco Drive, where scanner traffic indicated an anhydrous tank was involved. Details beyond the initial dispatch were limited in scanner traffic. By 10:42 a.m., an employee at the scene reportedly communicated that there was no threat to the public and no real hazard, according to dispatchers. At 10:49 a.m., scanner traffic indicated that per the fire chief, the area could be reopened.
Janesville Fire Responds to Evansville
At 9:41 a.m., Janesville fire units were heard responding to the Evansville area, scanner traffic indicated. No further details about that call were broadcast on monitored channels.
Mega Warehouse Structure Fire
One of the most significant calls of the morning came at 11:29 a.m., when unit 812 reported on scene at what was described as a mega warehouse with a structure fire in progress. Scanner traffic indicated an evacuation was underway at the time of the report. Dispatchers noted that no information was showing from the address in their system, but that units would be investigating. At 11:45 a.m., Engine 812 was heard communicating a plan with agents regarding potential recurrence of the fire condition.
Additional Calls and Scene Status
Throughout the morning, scanner traffic also referenced a transformer-related call involving Rock fire unit 142, a fire alert for unit E-19 that was acknowledged, and a general fire alarm at a location described as involving power systems on Ventric Work Road, according to dispatchers. By 12:02 p.m., scanner traffic indicated a fire alarm had passed but not fully cleared, and activity continued to wind down through midday.
No injuries were reported in scanner traffic monitored during this period.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

