This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Multiple Rock County fire units responded to a fire call beginning at approximately 10:09 p.m. on Tuesday, August 11, 2026, according to scanner traffic monitored by 608Scanner.com. The response involved several units over the course of roughly 45 minutes before the scene was cleared.

Initial Dispatch and Response

Dispatchers first reported the fire call at 10:09 p.m., with scanner traffic indicating units were directed to respond. A unit identified in scanner traffic as 4-1 acknowledged the call at 10:10 p.m., advising dispatchers they would obtain an address momentarily.

By 10:17 p.m., scanner traffic indicated that unit Rock Fire 143 had arrived on scene and transmitted what appeared to be a cancellation of at least one other responding unit, with traffic referencing unit 113 being told it could cancel. Around the same time, scanner traffic referenced a unit identified as Rock Fire 1-4 being advised of a clean transport.

Multiple Units Deployed

Scanner traffic throughout the incident reflected a multi-unit response. At 10:21 p.m., a unit identified in scanner traffic as Montana 14 reported it was available for return. At 10:22 p.m., dispatchers were heard referencing what appeared to be a one-factor motion, though the transmission was partially unclear.

At 10:26 p.m., scanner traffic indicated a unit identified as 641 was communicating with headquarters. At 10:28 p.m., a unit designated 402 was heard in scanner traffic in connection with fire assist operations.

At 10:30 p.m., scanner traffic indicated a unit with a designation referencing tail end 14 reported arriving on location. Unit 16-41 was heard in scanner traffic at 10:33 p.m. as being en route, and scanner traffic at 10:33 p.m. also indicated unit 14 was shown on scene. A unit identified as 1-41 was heard confirming its arrival on scene at 10:39 p.m.

Extended Activity and Scene Clearance

Scanner activity continued into the late evening hours. At 10:51 p.m., scanner traffic indicated unit Rock Fire 142 was en route and deployed. The incident appeared to conclude at approximately 10:55 p.m., when scanner traffic indicated the fire alarm had been removed, suggesting units were stood down and the scene was being cleared.

The scanner transcript did not include any references to injuries, fatalities, structure type, or the cause of the fire. No investigators were heard being called to the scene in the available scanner traffic, and no specific street address was confirmed over the air beyond references to individual unit designations and locations.

608Scanner.com will continue to monitor Rock County public safety channels for any additional information related to this incident.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.