This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County fire units responded to multiple fire-related calls on the morning of Monday, July 20, 2026, beginning just after 10:30 a.m., with scanner traffic indicating activity at several locations across the county, including an alarm at IPM Foods and a structure fire drawing Janesville fire resources.

Initial Response

Dispatchers first broadcast a fire alarm call at 10:34 a.m., with scanner traffic referencing Rock Fire 142 and locations identified as Harris Point of Life on Royal and Hills Point on Blackmore Road. The exact nature of the initial call was not fully clear from scanner traffic, though units were heard responding to the assignment.

IPM Foods Alarm

At 10:57 a.m., dispatchers reported an alarm at IPM Foods, with scanner traffic specifying a waterfall alarm in Zone 8 on Riser 2. The alarm designation suggested an automated fire suppression or detection system had been triggered at the facility, according to the scanner broadcast. No injuries or fire damage were mentioned in connection with this call in the available scanner traffic.

Prior Calls to Address Noted

At 11:21 a.m., scanner traffic indicated that fire personnel were checking whether there had been any previous calls to the address, with a reference to a prior call occurring on a Sunday. No further details about any prior incident were broadcast.

Janesville Structure Fire

At 11:37 a.m., Janesville fire units were heard responding to what dispatchers described as a structure fire, with ventilation equipment reported en route and an address data record — referenced as ADR — noted as in progress. The location of the structure fire was not specified in the available scanner traffic. No information regarding injuries, victims, or the extent of the fire was broadcast on the scanner.

Units Return to Service

Rock Fire Unit 844 was heard going back in service at 11:23 a.m., according to scanner traffic. At 11:56 a.m., Rock County scanner traffic indicated that fire and safety units were returning, suggesting the scene or scenes had been cleared or that resources were being released. No investigators were mentioned as being called to any of the locations in the available scanner traffic.

Scene Status

Based on scanner traffic, Rock County fire and safety units appeared to be wrapping up operations by approximately 11:56 a.m. The cause of any alarms or the structure fire was not addressed in scanner broadcasts, and no further information about outcomes was available from the transcript.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.