This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire crews responded to a fire call early Sunday morning, June 21, 2026, with scanner traffic first indicating the alarm at approximately 7:34 a.m. Multiple units were heard coordinating on radio channels over a roughly 30-minute period as the situation developed.
Initial Dispatch and Response
At 7:34 a.m., dispatchers were heard acknowledging what scanner traffic described as a “free alarm” with people reported at the scene. Minutes later, at 7:36 a.m., a unit identified as Rock Fire 241 radioed in, indicating it was clearing and returning to service and asked dispatchers to advise on further instructions, according to scanner traffic.
Smoke Alarm and Scene Activity
By 7:51 a.m., scanner traffic referenced a “backfire” along with a numeric notation of 1.23, followed by a unit clearing and turning, though the specific meaning of that reference was not entirely clear from available radio transmissions. Just one minute later, at 7:52 a.m., a unit was heard requesting information about a smoke alarm, asking dispatchers to clarify details about what was present at the scene, according to scanner traffic.
At 7:58 a.m., a unit identified in scanner traffic as Rock Fire 4-3 was heard on the channel, though the nature of that transmission was not fully discernible. At 8:00 a.m., dispatchers were heard relaying what was described as fire information associated with unit 43, scanner traffic indicated.
Additional Resources Requested
At 8:02 a.m., scanner traffic indicated a unit identified as 2-5 reported that fires were on scene and that crews were requesting what was described as “100,” which scanner traffic suggested may have referred to an additional resource or personnel request, though the exact nature of that request was not fully clear from available transmissions.
Scene and Unit Summary
Units referenced throughout scanner traffic included Rock Fire 241, a unit identified as 4-3 or 43, and a unit identified as 2-5, according to radio transmissions. No specific address or cross-street was broadcast during the monitored scanner traffic. No injuries were mentioned in scanner traffic, and no investigators were referenced as being called to the scene during the period covered by available transmissions. Scanner traffic did not indicate whether the scene had been cleared or remained active as of the final transmission logged at 8:02 a.m.
608scanner.com will continue to monitor this developing situation for any further updates broadcast on Rock County public safety channels.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

