This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County fire units were dispatched to an alarm call in the early morning hours of Tuesday, August 4, 2026, with scanner traffic first capturing activity at approximately 5:35 a.m. Multiple agencies and units were heard responding over the course of roughly an hour, according to scanner traffic monitored by 608scanner.com.

Initial Response

Scanner traffic at 5:35 a.m. indicated a fire-related dispatch, with a unit identified in communications as associated with Turtle fire acknowledged by dispatchers. Minutes later, at 5:39 a.m., Rock Fire communications directed a battalion and an engineer unit — identified in scanner traffic as units 14-19 — in response to a reported 10-90. Dispatchers were heard directing the responding unit to travel northbound on Highway 14 and then onto the interstate, suggesting the unit was being guided toward a specific location via traffic camera observation.

Also at 5:39 a.m., a unit identified in scanner traffic as Mercy North reported no smoke visible at their location, according to dispatchers.

Fire Alarm Confirmed, Additional Units Active

By 5:42 a.m., scanner traffic indicated that a fire alarm had been confirmed and that communications were being handled through Transcom, the regional communications center. At 5:53 a.m., a unit referenced in scanner traffic as associated with Rock Fire — designated 143 — was heard in radio traffic, with dispatchers referencing wind conditions at that time.

At 5:55 a.m., scanner traffic captured contact between Rock Fire and battalion headquarters. Two minutes later, at 5:57 a.m., a unit identified as Rock Fire 1-42s acknowledged a transmission with a 10-4, indicating continued operational activity at the scene or in the field.

Later Activity: Intrusion Alarm

Activity on Rock County scanner frequencies continued into the 6 a.m. hour. At 6:22 a.m., a unit designated 5-29 was heard responding to what dispatchers described as an intrusion alarm, according to scanner traffic. At 6:23 a.m., a dispatcher noted that a second alarm was not confirmed, adding context that the location had experienced multiple alarms previously and that work activity at the site typically begins around 6 a.m. — suggesting the alarm activations may have been connected to that early-morning activity, according to scanner traffic.

Scene Status

Scanner traffic did not indicate any injuries, structural damage, or fire extension during the monitored period. No investigators were reported as called to the scene based on available scanner traffic. The scene status was not explicitly confirmed as cleared within the transcript, and no cause was identified in scanner communications. 608scanner.com will continue to monitor Rock County frequencies for any further developments related to this response.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.