This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire units responded to a dump fire early Monday morning, June 1, 2026, with dispatchers first logging the call at approximately 7:16 a.m. and crews remaining on scene for nearly an hour before the fire was reported under control.
Initial Response
Scanner traffic indicated the call originated at 7:16 a.m. when Rock County dispatchers announced a Rockfire response under the designation 10-861. Three minutes later, at 7:19 a.m., a unit identified as 2015 acknowledged the dump fire call and confirmed they were in house, indicating the crew was at their station and preparing to respond.
Units on Scene
According to scanner traffic, unit 1-861 was directed by dispatch at 7:31 a.m. to switch to the fire ground channel, a standard communication procedure used to move active crews onto a dedicated tactical frequency during firefighting operations. That direction was repeated at 7:56 a.m., when dispatchers again instructed units to switch over to fire ground. At the same time, scanner traffic confirmed that units 815 and 861 were on the fire ground channel, indicating multiple units had arrived and were actively engaged at the scene.
Fire Reported at Scene
At 8:11 a.m., scanner traffic indicated that fire was confirmed at the scene. The transmission marked approximately 55 minutes of documented radio activity from the initial dispatch through the on-scene fire report, suggesting an extended operational period at the location.
Ongoing Details
Scanner traffic did not include any reports of injuries, exposures to nearby structures, or calls for additional emergency medical resources. No investigators were reported as called to the scene based on available scanner transmissions, and no address beyond the unit designation and call type was broadcast during the monitored period. The specific location of the dump fire within Rock County was not publicly identified in scanner traffic.
The cause of the fire was not discussed in scanner transmissions, and no further details regarding the size or scope of the fire were broadcast during the monitored period. It was not immediately clear from scanner traffic whether the scene had been fully cleared following the 8:11 a.m. transmission.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

