This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County fire units responded to what appeared to be a fire alarm call late Saturday night, August 1, 2026, with the first units arriving on scene shortly after 10:36 p.m., according to scanner traffic. The response ultimately wound down after an alarm company made contact with a keyholder who requested a cancellation.

Units Respond, Some Canceled Early

Scanner traffic indicated the initial dispatch went out just before 10:36 p.m., with units designated as 241 and 211 among those called. Unit 142 was among the first to arrive on scene and transmitted shortly after 10:36 p.m. that units 211 and 240 could disregard, as there was no patient present at the location, according to scanner audio. Unit 142 also advised that the road unit was on scene and prepared to take the call.

Alarm Company Contacts Keyholder

At approximately 10:45 p.m., scanner traffic indicated that the alarm company had called back and made contact with a keyholder associated with the property. According to dispatchers, the keyholder requested a cancellation of the response at that time. The nature of what triggered the initial alarm was not specified in scanner communications.

Employee Referenced at Scene

At approximately 10:52 p.m., scanner traffic included a brief transmission referencing unit 142 and what dispatchers described as an employee at the location. No further details about the employee’s role or involvement were broadcast over the scanner, and no injuries were reported in any of the transmissions monitored.

Scene and Location Status

At 11:13 p.m., scanner traffic suggested responders or dispatch were working to confirm or clarify the scene’s street address or location, with a transmission referencing a “real down location or scene street,” according to scanner audio. The exact address of the call was not clearly broadcast in the transmissions captured.

At 11:27 p.m., unit 611 was heard transmitting to Rock County Fire, though the content of that communication was not fully captured in available scanner traffic. It was not clear from scanner communications whether all units had fully cleared the scene by that time.

No Injuries Reported

No injuries were reported in any scanner transmissions monitored during this incident. No mention of an active fire, smoke, or structural damage was made in the scanner traffic, and no investigators or additional specialty units were heard being called to the scene. The keyholder’s cancellation request, relayed through the alarm company, appeared to be a key factor in winding down the response, scanner traffic indicated.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.