This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire response was initiated in Rock County just before 1 a.m. on Tuesday, July 21, 2026, following a report of smoke detected at a snow property, with at least one unit later transported to a local hospital, according to scanner traffic.
Initial Report and Response
Dispatchers first broadcast the call at 12:38 a.m., designating it as a Rock County fire response and assigning unit Rock Fire 1441 to the call. Scanner traffic indicated the call was logged as remote, though no further detail about the specific address or cross-streets was broadcast at that time.
By 12:44 a.m., scanner traffic indicated that a Department of Public Works employee — described as a worker on the property — had reported detecting smoke at what dispatchers referred to as the snow property. The DPW worker’s observation appeared to have prompted or supported the emergency response already underway.
Units on Scene
At 12:45 a.m., Rock Fire 1441 reported being on scene, with scanner traffic logging a time of 14 minutes on scene at that point. A second fire unit, identified in scanner traffic as Park Fire with unit Rensen 815, was also heard on the frequency and cleared from the air at 1:01 a.m., according to dispatchers.
At 1:03 a.m., a brief transmission confirmed acknowledgment on the fire line, scanner traffic indicated.
Transport to Mercy
At 1:20 a.m., scanner traffic indicated that Rock Fire 1441 was en route to Mercy, suggesting at least one individual associated with the scene was being transported to Mercy hospital. No details regarding the nature or severity of any injuries were broadcast over the scanner.
Unit Fire 342 was heard acknowledging a transmission at 1:42 a.m., according to scanner traffic, indicating continued radio activity related to the incident nearly an hour after the initial on-scene report.
Units Return
At 1:47 a.m. — approximately one hour and nine minutes after the first units arrived on scene — Rock Fire 1441 was heard indicating it was finishing up and returning, scanner traffic indicated. No declaration of the fire being fully extinguished, no investigator callout, and no additional units were broadcast over the scanner frequency during the monitored period.
The cause of the smoke or fire was not determined from scanner traffic, and no further details about the extent of damage or the condition of anyone transported to Mercy were broadcast during the incident window.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

