This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire call in Rock County on the afternoon of July 10, 2026, drew a multi-agency response including fire, law enforcement, and ambulance units before the scene was gradually cleared over the course of about an hour, scanner traffic indicated. The first transmission was logged at approximately 3:24 p.m., with dispatchers actively coordinating units through the mid-afternoon hours.
Initial Response and Law Enforcement Request
According to scanner traffic, Rock Fire requested law enforcement assistance as early as 3:24 p.m., with dispatchers confirming three units were en route by 3:26 p.m. A transmission at 3:27 p.m. indicated that radio communications were experiencing difficulties, with one unit’s transmissions described as coming across “really garbled,” prompting a request to repeat the message.
A 10-70 — a code used in some jurisdictions to indicate a fire — was acknowledged over the radio at 3:35 p.m., according to scanner audio.
Units Respond, Some Disregarded
By 3:37 p.m., scanner traffic indicated that one unit had cleared from the scene, with dispatchers noting that Battalion 32 would remain on location for additional time. Shortly after, at 3:39 p.m., Rock Fire contacted ambulance units A44 and Engine A14 and advised them they could disregard, reportedly at the direction of law enforcement on scene.
At 3:55 p.m., a transmission referenced personnel being cleared by command in teams, suggesting an organized withdrawal of resources from the scene. Around the same time, Townline Fire was heard on scanner traffic responding to what was described as a false alarm, with dispatchers noting one unit would assist with resetting and that remaining units were available.
Water Flow Alarm Raises Concern
At 3:51 p.m., a water flow alarm was referenced over scanner traffic, with a unit asking whether responders should be advised if it was needed. The nature and location of the alarm were not fully detailed in the available transmissions.
A separate and potentially related concern emerged later in the response. At 4:35 p.m., a unit on scene at the intersection of Gershwin Drive and Norwood Road reported a fire hydrant at that corner and described a water situation, telling dispatchers to “shoot and help water.” The unit also indicated that contact had been made with the water department, which scanner traffic noted was “not aware of anything going on in that area at this time.”
Additional Units, Scene Activity
Scanner traffic at 4:07 p.m. referenced Rock Fire and what appeared to be a unit communication, followed by a transmission at 4:16 p.m. identifying Rockfire 2 and Engine 814 as active in the response. The extended timeline of radio traffic — spanning from approximately 3:24 p.m. to 4:35 p.m. — suggested a prolonged scene presence involving multiple fire and emergency units.
No injuries were reported over scanner traffic, and no official cause or further scene status was confirmed in the available transmissions. The full scope of the fire, its origin, and any property damage were not detailed in scanner audio.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

