This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A fire response in Rock County on Sunday afternoon, June 14, 2026, drew multiple fire units and at least one ambulance, with scanner traffic indicating the scene remained active for more than 40 minutes after the initial call.

Initial Response and Units Dispatched

Scanner traffic first captured fire-related radio communications beginning around 1:24 p.m., when dispatchers were heard asking Clinton Fire whether they were en route to the scene. At 1:25 p.m., Rock County dispatchers directed fire units to keep resources staged to the north, according to scanner traffic.

Additional Ambulance Requested

At approximately 1:28 p.m., a unit identifying itself as 4-4-2 radioed Rock County dispatchers to request an additional ambulance at the scene, scanner traffic indicated. The request suggested conditions at the fire scene may have required medical attention, though the nature or number of any injuries was not made clear in the available scanner transmissions.

Ongoing Radio Traffic

At 1:32 p.m., Rock County fire dispatchers were heard issuing a brief radio call, the details of which were unclear in the transcript. Several minutes later, at 1:43 p.m., unit 4-4-2 was heard advising dispatchers that they were en route to Beloit Memorial Hospital, according to scanner traffic originating from the Beloit Memorial channel. This transmission suggested at least one patient was being transported for medical evaluation, though no further details regarding the patient’s condition were broadcast on the scanner.

Scene Status

At 1:48 p.m., Rock County fire dispatchers were heard referencing what scanner traffic described as a “chair and handle,” though the meaning of that communication in context was not immediately clear from the transcript alone. The scene’s status — whether it had been cleared or remained active — was not confirmed in the available scanner traffic.

Agencies Involved

According to scanner traffic, the response involved Rock County fire and emergency communications, Clinton Fire, and unit 4-4-2, with coordination also noted on the Beloit Memorial Hospital channel. The specific location of the fire within Rock County was not identified in the scanner transmissions captured for this report.

608scanner.com will continue to monitor for any additional information released by Rock County public safety agencies regarding this response.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.