This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire in Rock County prompted a multi-unit response from Rock County Fire beginning just after 5:20 a.m. on Wednesday, July 15, 2026, with units working the scene for more than two hours before clearing, according to scanner traffic.
Initial Response
Scanner traffic indicated the call came in at approximately 5:21 a.m., with units 3 and 42 reported as running on scene. At 5:25 a.m., a commander on scene requested that Engine 3-14 be dispatched to the location, suggesting the incident required additional resources beyond those already responding, according to radio transmissions.
By 5:37 a.m., scanner traffic indicated that two units were marked at what dispatchers referenced as the “gas show,” a term that could not be further clarified based solely on the available transcript. At 5:58 a.m., dispatchers asked Rock County Fire to mark a line on scene, a standard request used to establish a perimeter or document unit positioning.
Road Closure and Scene Operations
Operations appeared to expand through the early morning hours. At 6:22 a.m., scanner traffic indicated that personnel communicated with dispatchers that law enforcement could be notified the road was being reopened, suggesting a temporary road closure had been in effect in the area. The nature and location of the closure were not further specified in the transcript.
Additional radio traffic at 6:23 a.m. referenced unit 3-4 in what appeared to be an operational update, followed at 6:40 a.m. by a transmission from Rock County Fire unit 3-4 referencing a change in status. At 6:46 a.m., scanner traffic included a brief transmission referencing units 1, 3, and 6, the context of which could not be fully determined from available audio.
Units Clearing the Scene
Activity on scene appeared to wind down through the 6:50 to 7:00 a.m. timeframe. At 6:50 a.m., unit 3-42 was heard on scanner traffic with what appeared to be a status update. Separate transmissions at 6:54 a.m. referenced Rock County Fire units and the word “house,” though the specific context of those communications could not be fully confirmed from the transcript alone.
At 7:04 a.m., scanner traffic indicated that unit 32 was resigning quarters, suggesting some units had begun returning to station. The scene appeared to reach full clearance by approximately 7:29 a.m., when Rock County Fire units 814 and 844 were heard in what scanner traffic described as an officially concluding transmission, marking the end of active operations at the scene.
No Injuries Reported on Scanner
Scanner traffic monitored throughout the duration of the incident contained no references to injuries, fatalities, or requests for medical units. No investigators were heard being called to the scene based on available radio traffic, and no cause of the fire was discussed over scanner frequencies.
608scanner.com will continue to monitor Rock County public safety frequencies for any follow-up information on this incident.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

