This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire units responded to multiple fire alarm calls over the course of nearly two hours on the evening of Saturday, July 18, 2026, with scanner traffic first reporting activity at 7:56 p.m. and continuing through approximately 9:55 p.m. A wind advisory was in effect at the time of the initial call, according to dispatchers.
Initial Response
The first fire alarm call was dispatched at 7:56 p.m., with scanner traffic indicating three units were responding at that time. A wind advisory was noted by dispatchers alongside the initial alarm. Within minutes, at 7:57 p.m., scanner traffic indicated that unit Fire 641 had returned to quarters, suggesting an early clearing of at least one unit from the initial call.
At 8:04 p.m., scanner traffic indicated a fire unit was approaching the scene, suggesting the primary response was still active. No address or cross-street was broadcast on the scanner traffic captured for that transmission.
Additional Alarms and Activity
A second fire alarm call was dispatched at 8:33 p.m., with dispatchers describing it as a new fire alarm, separate from the earlier activity. At 8:45 p.m., scanner traffic referenced fire activity once more, though specific details in that transmission were limited.
At 8:46 p.m., Janesville Fire was heard on scanner traffic in connection with what dispatchers described as a high service call. The nature of that call and whether it was related to earlier Rock County fire activity was not clarified in the scanner traffic.
At 8:58 p.m., scanner traffic indicated Rock County fire turtle units were returning to quarters, suggesting a portion of the response had concluded by that time.
Further Calls and Late Evening Activity
At 9:18 p.m., a fireworks complaint was reported on Rock County scanner traffic, though no location was specified in the transmission. At 9:25 p.m., dispatchers broadcast what was described as a seat alarm, with units directed to respond. Scanner traffic at 9:33 p.m. indicated unit Fire 14-11 was involved in activity described as back and forward, though the specifics of that transmission were unclear.
The final fire-related transmission captured came at 9:55 p.m., when Rock County scanner traffic referenced unit 1.3 with a transmission that scanner traffic indicated included a definitive acknowledgment, though no further details were available in that broadcast.
An intrusion alarm was also dispatched on Rock County channels at 8:23 p.m. under unit designation 31-230, though whether that call was connected to any of the fire-related activity was not indicated in scanner traffic.
Injuries and Cause
No injuries were mentioned in any of the scanner transmissions captured. The cause of any of the fire alarm activations was not discussed in scanner traffic, and no investigators were heard being called to any scene based on available transmissions.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

