This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A roadside brush fire that broke out in Rock County on the afternoon of July 20, 2026, prompted a multi-agency fire response and a request for a utility inspection after dispatchers identified a possible transformer fire hazard at the location.
Brush Fire Discovered Along Roadside
Scanner traffic indicated the first units were en route shortly after 1:00 p.m., with Rock County Fire unit 372 arriving on scene at approximately 1:04 p.m. According to dispatchers, unit 372 reported a roughly 10-foot area of brush burning along the side of the road and advised it would be out investigating. At 1:07 p.m., dispatch contacted Rock Energy to report a possible transformer fire hazard at the location and requested an inspection.
Multiple Units Respond; Janesville Fire Called In
Scanner traffic indicated Rock County Fire units 14 and 41 were en route during the response. At 1:17 p.m., Janesville Fire units 14 and 41 were also dispatched to the scene, with scanner traffic noting a chainsaw and a Mercy unit were part of that response. Unit 14 was noted as back in quarters at 1:22 p.m., according to dispatchers.
Scanner traffic at 1:27 p.m. referenced unit 261 and indicated unit 241 was being taken out of service. Rock County Fire unit 261 was reported clear of the scene at 1:41 p.m. Additional radio traffic at 1:56 p.m. referenced unit 607, though the context of that transmission was not fully clear from available scanner audio.
Activity Continues Into Mid-Afternoon
Scanner traffic continued through the mid-afternoon hours, with a transmission at 2:16 p.m. referencing unit 211 and additional activity noted at 2:43 p.m. involving Rock County Fire unit 4, with references to units 8-4 and 8-14 in connection with returning units, according to scanner audio. A unit identified as “cabby” was reported off at 2:47 p.m.
Separate Alarm Activations Also Monitored
During the same afternoon window, Janesville Fire units were also dispatched at 1:24 p.m. to an alarm activation on North Ray Road, where dispatchers noted there was no contact with the subscriber. Separately, at 2:51 p.m., scanner traffic from the North Jackson Street area indicated a caller described as a regional manager reported concerns about a rear and front door at that address. According to scanner traffic, an alarm company had spoken with someone who was not on scene, and it was stated that no one should have been at the location. A unit was reported clear of an entrance alarm at 2:58 p.m.
Scene Status
Based on available scanner traffic, Rock County Fire units were returning and clearing the brush fire scene by mid-afternoon. The Rock Energy utility inspection was requested by dispatchers, though no outcome of that inspection was reflected in scanner audio. No injuries were reported in scanner traffic related to any of the afternoon’s calls.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

