This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A series of traffic-related calls kept Rock County and Beloit units active in the early morning hours of Sunday, July 19, 2026, beginning at approximately 1:46 a.m. and extending nearly to 3 a.m., according to scanner traffic.
Initial Traffic Call and Reported Crash
Scanner traffic indicated the activity began at 1:46 a.m. with what dispatchers described as a community traffic cost call. Shortly after, at approximately 1:48 a.m., Rock County dispatchers reported a motor vehicle accident with a possible injury, noting that a vehicle had been involved in the crash. Specific details regarding the location of the MVA or the nature of any injuries were not broadcast on the scanner frequency monitored.
Traffic Stop in Beloit Township
At approximately 2:00 a.m., Beloit units were alerted to prepare for a traffic stop out of the township, with scanner traffic placing the stop near the intersection of Breyer and Riverside, with dispatchers referencing Breyer specifically. Units were heard responding to the call, though no further details about the stop’s outcome were immediately broadcast on that channel.
Vehicle Fails to Stop for Officer
Also at approximately 2:00 a.m., Rock County scanner traffic indicated a separate situation in which a vehicle traveling eastbound failed to stop for Townline. An officer on scene was reported as currently not requesting any assistance at that time, according to dispatchers.
Driver Identification, Male Subject Reported
At approximately 2:24 a.m., scanner traffic indicated that units were working to identify the driver of a vehicle involved in one of the ongoing calls. By 2:34 a.m., Rock County dispatchers reported that police enforcement units had located a male subject in connection with a vehicle traveling northbound. Additional scanner traffic at that same time referenced a subject and a vehicle, with units described as heading northbound, though further specifics were limited in the transmissions monitored.
Female Subject, Route 80 Area
At approximately 2:47 a.m., Rock County scanner traffic indicated that dispatch received a traffic-related transmission referencing one female subject. Dispatchers were heard referencing a starting route of 80.2, which scanner traffic suggested was associated with State Route 80 or a nearby corridor, though the exact address was not clearly broadcast. A code of 10-19 was noted in the transmission.
Scene and Agency Status
Scanner traffic did not indicate that any scene had been fully cleared or that investigators had been called in as of the final transmission monitored at 2:47 a.m. Both Rock County sheriff’s units and Beloit units were referenced as active during the multi-hour span of calls. No additional agencies were heard responding, and no further injury details beyond the initial possible injury report were broadcast on the frequencies monitored.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

