This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Multiple fire and emergency units responded to a fire in Rock County on Sunday, August 16, 2026, with the first unit reported on scene just before 12:28 p.m. Scanner traffic also indicated a brief reference to a shots fired call that was cleared around the same time, though the fire response remained the primary focus of radio traffic throughout the afternoon.
Units On Scene
According to scanner traffic, Rock Fire unit 1-4-3 was reported on scene at 12:28 p.m. Dispatchers were heard directing additional resources to the fire shortly after, with radio traffic at 12:41 p.m. indicating that a unit identified as 4-1 was directed to respond to the scene. At 12:43 p.m., dispatchers were heard attempting to reach Rock Fire unit 641, asking whether the unit was on location.
By 12:48 p.m., Janesville Fire was heard on scanner traffic in connection with the response, with a transmission referencing unit 1-43 and Adelaide Avenue as the associated address. At 12:49 p.m., Rock Fire units Engine 112 and Ambulance 141 were also referenced in scanner traffic, indicating a multi-unit emergency response was underway.
Smoke Reported
At 1:05 p.m., scanner traffic included a transmission from unit AER-778 in which smoke was referenced, though the message was partially unclear. The transmission appeared to indicate that smoke was still present or being monitored at that time, according to scanner audio. The exact location of the smoke in relation to the fire scene was not fully discernible from the available scanner traffic.
Shots Fired Call Cleared
Separately, scanner traffic at 12:28 p.m. indicated that a shots fired call — referenced as item 11 — was marked 10-10, meaning the matter was considered resolved at that time. Scanner traffic did not connect the shots fired call to the fire response, and no further information about that call was broadcast on the monitored frequencies.
Additional Resources
Scanner traffic at 12:40 p.m. included a transmission referencing what appeared to be a request for fire assist, though the transmission was partially unclear. The involvement of both Rock County and Janesville Fire Department resources suggested a mutual aid response was coordinated during the incident, according to scanner traffic.
The scene status, cause of the fire, and whether any injuries occurred were not confirmed in the available scanner traffic. This incident remains ongoing as of the last monitored transmissions at approximately 1:05 p.m.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

