This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Multiple fire and emergency medical services units across Rock County were active throughout the morning of Monday, August 3, 2026, responding to a series of calls that began shortly after 9 a.m. and continued past 11 a.m., according to scanner traffic monitored by 608scanner.com.
Early Morning Fire and EMS Response
The activity began at approximately 9:09 a.m. when dispatchers routed fire units to what scanner traffic identified as Route Fire 143 in the Beloit area. Simultaneously, Rock County dispatch acknowledged fire communications from Ambulance 241, scanner traffic indicated.
By 9:15 a.m., Rock Fire 143 reported clearing the initial call and noted the unit was available, according to scanner traffic. At 9:28 a.m., dispatchers broadcast that EMS unit D41 was transporting a patient to Mercy Parkway, and Rock Fire 142 reported clearing and becoming available at 9:32 a.m.
EMS 241 reported arriving at the hospital at 9:44 a.m. and subsequently cleared and became available at 9:54 a.m., according to scanner traffic.
Janesville Fire Responds to Park Avenue Alarm
At 10:12 a.m., Janesville Fire was dispatched to Park Avenue for what dispatchers described as a weekly alarm activation. Scanner traffic indicated there was no answer at the door upon arrival. No further information about the Park Avenue call outcome was broadcast on the scanner.
Additional Calls and Ongoing Activity
At 10:20 a.m., scanner traffic referenced Rock Fire unit 1-4 in connection with Mercy, and at 10:29 a.m., a fire alarm was noted on scanner traffic logged as call 8-14, scanner traffic indicated.
At 10:41 a.m., scanner traffic indicated fire units were transporting a patient, though the destination reference was partially unclear in the transmission. At 10:55 a.m., dispatchers broadcast an informational note that alarms at an unspecified location were being tested, which appeared to account for at least one of the alarm activations logged during the morning.
Continued Scene Activity Into Late Morning
Rock Fire 143 reported arriving on scene at 11:05 a.m., and Fire 112 was noted in scanner traffic at 11:10 a.m., according to dispatchers. At 11:23 a.m., Rock Fire units began clearing from the air, and at 11:28 a.m., scanner traffic indicated Rock Fire 142 was returning to station.
No fatalities were reported in scanner traffic. The nature and cause of the various calls were not fully detailed in transmissions monitored. Multiple units including Rock Fire 143, Rock Fire 142, Rock Fire 112, EMS 241, and EMS D41 were among those active during the morning’s activity, scanner traffic indicated.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

