This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire and emergency units responded to a series of fire-related calls Sunday evening, June 28, 2026, beginning around 5:00 p.m. and extending past 6:00 p.m. Scanner traffic captured multiple dispatches across the county, including a utility concern, a residential alarm, and a report of fire activity in Orfordville.
Backfire and Utility Concern Reported
The evening’s activity began at approximately 5:00 p.m. when scanner traffic indicated a backfire originating from the direction of Highway 131. Shortly after, at 5:01 p.m., dispatchers advised that there was no active fire at that time. Units were also asked to notify Alliance — understood to be a utility provider — to inspect a pole in front of a location identified as Copeland, where a branch was reportedly rubbing against one of the wires, according to scanner traffic.
Hazardous Fire Reports and Sunset Block Activity
At 5:09 p.m., dispatchers referenced 23 hazardous fires, though the full context of that transmission was not entirely clear in scanner traffic. By 5:14 p.m., scanner communications indicated activity in the area of the 300 block of Sunset, with dispatchers referencing what was described as a fire arrest situation involving multiple units. Two of the fires were said to have been stopped, according to that transmission.
Residential Fire Alarm at South County Road
At 5:26 p.m., dispatchers sent units to a reported automatic residential fire alarm at a location identified as 96 of 6 South County — referenced in scanner traffic as a 10-96. The call was assigned designation H4, according to dispatchers. Within minutes, at 5:27 p.m., scanner traffic indicated that a unit had made contact with the homeowner at the scene. The homeowner advised that they had been cooking outside and that smoke had entered the home. Dispatchers relayed that everything was reported as okay at that location, and no further emergency response appeared necessary based on scanner traffic.
Fire Activity Reported in Orfordville
At 5:35 p.m., scanner traffic from the Orfordville area indicated a fire in the 500 block of Highway 26. A unit identified as Liberty was dispatched out of Orfordville in connection with that call, according to scanner communications. No further details about the nature or outcome of that fire were available in scanner traffic.
Units Available, Scene Wrapping Up
At 5:38 p.m., dispatchers confirmed that Fire Engine 815 was available, a status that was repeated in a second transmission at the same time. At 5:52 p.m., scanner traffic briefly indicated that fire units had been released. At 6:13 p.m., a final transmission identified as Rock Fire 143 was heard acknowledging a stage copy, suggesting units were standing by or wrapping up operations for the evening.
No injuries were reported in any of the calls captured in scanner traffic. The causes of the various fire-related reports were not established in scanner communications, and it was not clear from available transmissions whether any investigations were initiated.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

