This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County fire units responded to a series of fire-related calls on the afternoon of July 2, 2026, beginning at approximately 2:44 p.m. and extending into the early evening hours. The activity included a commercial fire alarm on Double Tree Drive, a separate alarm response by Janesville Fire on Lomaja Drive, and a reported structure fire involving a motor vehicle accident at the United Alloy facility.

Commercial Fire Alarm on Double Tree Drive

Scanner traffic indicated that Rock County dispatchers sent fire units to a commercial fire alarm on Double Tree Drive at approximately 2:47 p.m. According to dispatchers, the alarm was sounding at both buildings on Double Tree Drive, described as a commercial location near Metal Lake. Responding units reported they had found no flames and were not smelling smoke, and suggested the alarm may have been an ongoing or recurring issue with the system, scanner traffic indicated.

At approximately 3:06 p.m., scanner traffic indicated that unit A14 reported the alarm had been cleared and reset. Units were heard clearing the scene and returning to quarters by shortly after 3:04 p.m., with unit 3-42 noted as back in quarters.

Janesville Fire Responds to Lomaja Drive Alarm

At approximately 2:48 p.m., Janesville Fire was heard on scanner traffic responding to a fire alarm at what was described as the Lomaja apartment complex on Lomaja Drive. No additional details about that call, including whether units found any fire or smoke, were broadcast on scanner traffic monitored for this report.

Additional Fire Activity Across the County

Throughout the afternoon, scanner traffic reflected ongoing fire-related activity across Rock County. At approximately 3:10 p.m., a unit identified as Tilt Fire was heard reporting a pull-off on Sherman Avenue. At 3:20 p.m., a transmission referencing unit 7-22 mentioned fireworks, scanner traffic indicated.

At approximately 3:34 p.m., dispatchers referenced unit Model 23 and indicated a fancy alarm had started. By 3:55 p.m., scanner traffic indicated that an alarm company was making contact with the owner of a residence described as a living room alarm, though no further details about that location were broadcast.

Structure Fire and MVA at United Alloy

At approximately 3:57 p.m., dispatchers broadcast a call for units to respond to a structure fire and motor vehicle accident at United Alloy, with scanner traffic indicating a request to check on available resources. A follow-up transmission at approximately 4:00 p.m. indicated units were being directed to route to a station for equipment in connection with the fire response. The nature or extent of the structure fire, and whether any injuries occurred in connection with the MVA, was not confirmed in scanner traffic monitored for this report.

At 4:15 p.m., Rock County fire traffic referenced unit 140, with scanner traffic indicating activity consistent with units still engaged in fire operations.

Scene Status

Scanner traffic indicated that several units cleared their respective calls and returned to quarters over the course of the afternoon. The status of the United Alloy structure fire and MVA response was not fully resolved in the scanner traffic monitored for this report. No injuries were confirmed in any of the calls based on available scanner traffic.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.