This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A series of fire alarms and fire-related calls kept Rock County emergency units busy across the region on the morning of July 7, 2026, beginning just after 8:00 a.m. and stretching past 9:30 a.m. Scanner traffic indicated multiple agencies and units responded to several separate incidents throughout the county, with none of the alarms ultimately resulting in confirmed active fire conditions.
Commercial Fire Alarm Cleared Quickly
The morning’s activity began at approximately 8:10 a.m. when dispatchers reported a commercial fire alarm general alarm at an unspecified location. Within minutes, at 8:11 a.m., dispatch advised units that the alarm was a false alarm attributed to burnt toast and a kitchen issue, and that no assistance was needed, according to scanner traffic.
Niagara Parkway Fire Alarm
At 8:17 a.m., dispatchers reported a fire alarm designated as critical on Niagara Parkway. Scanner traffic indicated unit Backfire 131 responded to that call, with the unit also noting a position at Prairie for unit 112. No additional outcome details for the Niagara Parkway alarm were broadcast over scanner.
Track Fire and Fire Assist
At 8:45 a.m., scanner traffic indicated a track fire was reported from unit 142. One minute later, at 8:46 a.m., unit 313 was heard responding to a fire assist call. No further details about the location or outcome of either the track fire or the fire assist were broadcast.
Residential Fire Alarm — Evansville and Janesville
Shortly after 9:19 a.m., scanner traffic indicated that the Evansville Fire Department was engaged for a residential fire alarm. Simultaneously, the Janesville Fire Department was heard responding to a residential fire alarm as well. A caller associated with one of the residential alarms told dispatchers they did not know what had triggered the alarm and were not aware of any fire, according to scanner traffic at 9:20 a.m.
At 9:21 a.m., a unit identified the call as a permit with no fire found. Scanner traffic at 9:26 a.m. confirmed that crews arrived on scene and found everything to be fine, with the fire alarm active but no sign of fire. Units noted at 9:28 a.m. that work was being done on the alarm system and that additional alarms could be expected, advising other units to stand by for informational purposes.
McDonald’s Alarm on State Street
At 9:31 a.m., scanner traffic indicated units 3-12 and 3-13T were directed to a McDonald’s located on State Street, where a hold-up alarm had activated. Dispatchers noted the front camera was showing and requested a sergeant copy the call. By 9:34 a.m., scanner traffic indicated that police units on scene reported the alarm was no longer active and advised responding units to slow their response.
Park Metal Drive Residential Alarm
At 9:35 a.m., dispatchers reported an alarm at Park Metal Drive, described as a residential alarm showing entry at the front garage area, according to scanner traffic. No further details or outcome for that call were broadcast during the monitored period.
EMS Activity
Separately, at 8:11 a.m., scanner traffic indicated unit Backfire 43 was transporting a patient to Mercy, though no further details connecting that transport to any of the fire calls were broadcast.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

