This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Multiple fire and EMS units responded to a fire call in Rock County on the afternoon of Monday, May 25, 2026, with scanner traffic indicating the incident drew resources from several agencies over the course of nearly two hours before units began clearing the scene.
Initial Response
Dispatchers first requested EMS and fire units at approximately 4:41 p.m., with scanner traffic indicating that unit 642 reported on scene by 4:42 p.m. Within minutes, additional units including 811, 817, and others were acknowledged, according to radio traffic. By 4:46 p.m., dispatchers directed Rock County fire units — identified as an 8-4 team — to Valley Drive, which was the only specific location mentioned in scanner traffic.
Transport and Additional Units
At approximately 5:03 p.m., scanner traffic indicated that unit 843 was initiating a transport in the same general area. Shortly after, at 5:07 p.m., Janesville fire units were heard on radio traffic referencing the Oxford Town area and indicating they were en route to St. Mary’s Janesville, suggesting at least one patient was being transported to that facility, according to scanner communications.
Additional Rock County fire units continued to mobilize throughout the response. Unit 1471 was heard en route at 5:23 p.m. and reported on scene by 5:30 p.m., according to dispatchers.
Units Clearing the Scene
Scanner traffic at 5:36 p.m. indicated that unit 342 was clearing to Mercy, referencing what appeared to be a hospital destination. Unit 1471 was then heard finishing its return at 5:41 p.m. and receiving orders at 5:47 p.m., according to radio communications.
At 6:17 p.m., Beloit fire unit 2-4-1 was heard clearing the scene and finishing up, according to scanner traffic, indicating that Beloit fire resources had also been part of the response. A reference to Mercy hospital was again heard on Rock County radio traffic at 6:21 p.m.
Scene Status
By 6:31 p.m., scanner traffic indicated that fire units were being called back to quarters, suggesting the scene had been secured and the active response concluded. The incident spanned approximately one hour and 50 minutes from the initial dispatch to units returning to station, according to the scanner record.
The cause of the fire was not addressed in scanner traffic. No additional information regarding the nature or extent of the fire, the specific address on Valley Drive, or the condition of any patients was available from the scanner transcript.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

