This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Multiple fire departments responded to a working structure fire at a two-story residential apartment building in Rock County on the evening of July 11, 2026, with the first report of black smoke coming in at approximately 8:10 p.m.

Fire Reported, Units Upgraded to Working Structure

Scanner traffic indicated the initial call came in at 8:10 p.m. when a reporting party observed black smoke in the area. Rock County dispatchers assigned the call, with scanner traffic indicating units 141 and 142 were directed to respond. By 8:16 p.m., Janesville Fire was also noted as responding to reports of smoke showing on the upper floor of an apartment building, according to scanner traffic.

Rockfire Engine 411 arrived on scene at approximately 8:17 p.m. The unit reported a two-story residential apartment building with smoke coming from the roof line and indicated crews were in attack mode. Scanner traffic also indicated that a water supply had been established via a hydrant. Upon arrival, Engine 411’s crew requested that Rock County dispatch upgrade the call to a working structure fire, which dispatchers acknowledged.

Multiple Agencies Involved in Response

As the incident continued, scanner traffic reflected a broad multi-agency response. Units referred to as Dunboy Fire and Townway Fire were heard on the Rock County channel around 8:43 p.m. Townway Fire indicated they would be passing on the rear of the scene, and scanner traffic noted that units referred to as “turtles” would be passing on the engine for the box assignment.

At 8:54 p.m., scanner traffic referenced a subject pursuit and a motor vehicle accident in connection with the fire response, though details were limited. Around the same time, units including Alamo and Engine 3 were heard being directed out to the fire.

Clinton Fire was also referenced in scanner communications. At 8:58 p.m., Rock County fire traffic indicated that Clinton Engine units may not have had access to the correct radio channel, with a query about whether something needed to be released to bring them into communication. At 9:15 p.m., Rock County fire was heard attempting to reach Clinton Fire again on the scanner.

Additional Locations and Units Referenced

Scanner traffic at 9:01 p.m. referenced activity on Rockport Road in connection with the fire response, with a unit indicating they were choosing an off-line road. At 9:09 p.m., the back channel was noted as the Johnson Avenue fire operating channel, suggesting the fire was being managed on a dedicated frequency at that stage. Units 342 and 312 were heard en route at 9:10 p.m.

Scanner traffic at 8:55 p.m. included a reference to equipment near a station around the 16-41 area, and unit 16-40 was noted as en route at 8:26 p.m.

Scene Status

Scanner traffic did not confirm the fire was extinguished or the scene fully cleared during the monitored period. No injuries were reported over scanner communications. At 9:36 p.m., Rock County dispatchers were heard directing units 340 and 231 to an unrelated intrusion alarm call, suggesting some resources had become available. The cause of the fire was not discussed in scanner traffic.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.