This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A series of fire-related calls — including a brush fire, multiple fire alarms tied to lightning strikes, and a tree-and-power-line fire — kept Rock County and Janesville fire units busy for several hours beginning around 12:07 p.m. on Friday, July 3, 2026, according to scanner traffic monitored throughout the afternoon.

Initial Calls and Brush Fire Response

Janesville fire units were first dispatched shortly after noon with a general fire alarm, scanner traffic indicated. By 12:10 p.m., dispatchers were coordinating units near Highway 67 at Larson Road in connection with a fire alarm call. At 12:22 p.m., Janesville fire was directed to a tree on fire on top of a power line, with scanner traffic noting the power line was described as sizzling at the scene.

A brush fire was confirmed active by approximately 12:23 p.m., with units advised they would need to work the fire. By 12:24 p.m., scanner traffic indicated a brush fire was being handled and a unit designated as 2-4-1 was expected back in service shortly. At 12:25 p.m., Janesville fire units were dispatched to a brush fire at West Carolina, scanner traffic indicated, after clearing two prior runs.

At 12:29 p.m., dispatchers announced fire ground operations would be conducted on the red channel. By 12:30 p.m., unit 722 reported no active smoke or flames at its location.

Lightning-Related Alarms at Multiple Locations

As units worked the brush fire, additional calls began coming in that scanner traffic suggested were related to lightning activity in the area. At 12:42 p.m., Janesville fire was dispatched to a garage following a lightning strike, with a unit confirmed en route. Separately, dispatchers noted an automatic commercial fire alarm at a location on Gateway.

At 12:53 p.m., Janesville fire units were responding to an apartment complex where occupants had exited the building. Units reported no visible fire from three sides and were investigating further, scanner traffic indicated. By 12:57 p.m., a unit on scene reported the alarm had activated in the parking area below the apartment, with no fire found. A resident reported a lightning strike just outside the building had set off the alarm, according to scanner traffic. At 1:00 p.m., a fire alarm at Emerson was also noted, with no immediate concerns reported and units awaiting further information.

Multi-Agency Coordination and Coverage Shifts

The volume of simultaneous calls prompted notable coordination between agencies. At 12:20 p.m., scanner traffic indicated that unit 100 was being shown as covering the City of Beloit while Battalion 1 was assigned to the fire. Clinton units were also heard in coordination, with scanner traffic at 12:44 p.m. indicating Clinton would hold and free up an engine from the fire.

At 12:46 p.m., dispatchers noted a pending structure fire at Lee and East Ridge in the Boyd area. Harrison Command was referenced multiple times, and at 1:00 p.m. scanner traffic confirmed that Moscow Engine 3 had been released by Harrison Command and was returning from a working fire. Clinton Station also reported a unit en route to Lake Geneva at 1:19 p.m., and a Turtle Fire unit was directed to meet at a Geneva Square location around 1:20 p.m.

Scene Status

Scanner traffic through the early afternoon indicated units were gradually clearing from the various scenes. Multiple units were released or returned to service throughout the response period, with no injuries or fatalities mentioned in scanner traffic. The calls remained active and units were still being coordinated as late as 2:36 p.m., when a fire chief was heard checking for available units, scanner traffic indicated.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.