This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A large trash fire stretching an estimated 50 yards prompted a multi-agency response in Rock County late Sunday night, with units from Janesville, Rock County, and Footville all involved in battling the blaze, according to scanner traffic from May 31, 2026.
Fire Reported Shortly After 10 p.m.
Dispatchers first reported the fire at approximately 10:27 p.m. Scanner traffic indicated that Janesville Fire units were among the first to respond, with State 15 and State 13 noted as down at the time of the initial call. Unit 815 was heard positioning to attempt to secure a spot on the fire, according to scanner communications.
The fire was described over the scanner as a large trash fire approximately 50 yards in length. A Rock County dispatcher was heard referencing the incident as going to “the dump,” suggesting the fire involved a refuse or landfill-type site, though the exact location was not further specified in scanner traffic.
Multiple Units and Agencies Responded
Scanner traffic indicated a significant multi-agency response unfolded over the course of the evening. Rock County fire units acknowledged the call, with unit 2-20 and fire units 42 and 12 noted as responding from quarters at approximately 10:30 p.m. Janesville’s Battalion 9 out of Station 1 was also heard on the radio at 10:32 p.m., according to scanner audio.
At 10:33 p.m., a unit on scene transmitted that the fire was described as “quite the fire,” scanner traffic indicated. Rock County Engineer 13 was also heard communicating on the channel at approximately 10:36 p.m.
As the incident continued, scanner traffic at 10:53 p.m. indicated that Rock Fire was requesting a water tender from Footville, signaling that the blaze required additional water supply resources beyond what was immediately available on scene.
Scene Operations Continue Into Late Night
Operations extended well past the initial response. At 11:17 p.m., scanner traffic indicated that units on scene were switching to the Janesville Fire Ground channel, a move typically associated with active firefighting operations requiring dedicated radio communications. Shortly after, at approximately 11:20 p.m., a Rock County fire unit — identified as 241 — was heard referencing employees, though the context of that communication was not fully clear from available scanner audio.
No injuries were reported over scanner traffic, and no investigators were referenced in the transmissions monitored. The scene status had not been confirmed as cleared based on available scanner audio through approximately 11:20 p.m.
608scanner.com will provide updates as additional information becomes available.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

