This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Multiple fire units responded to a commercial fire alarm at a Salvation Army transitional living facility on Holiday Drive in Janesville in the early morning hours of Tuesday, August 4, 2026, with scanner traffic first indicating fire-related activity shortly before 12:45 a.m.
Initial Response and Scene Activity
Scanner traffic beginning at 12:41 a.m. indicated a unit designated as Fire 241 was communicating with dispatchers, asking whether to proceed directly to a structure. At 12:45 a.m., dispatchers acknowledged they were handling the situation by phone. By 1:05 a.m., units identified as Rock Fire reported being on scene, with scanner audio indicating two units were present.
At 1:15 a.m., additional radio traffic referenced a fire location and unit coordination, with unit 23-721 mentioned in scanner communications.
Salvation Army Transitional Living Facility Alarm
At approximately 1:34 a.m., dispatchers broadcast a fire assist call for a fire alarm at what was described as 20th of Holiday Drive, with Battalion 8 referenced in the response. One minute later, at 1:35 a.m., dispatchers confirmed that units A-15, A-14, and Battalion 8 were all en route to the Salvation Army transitional living facility on Holiday Drive, with Church Street noted as a cross-street. The call was classified as a commercial fire alarm, designated 4-8 in scanner traffic.
Structure Fire Reported in 1900 Block
At 1:38 a.m., Janesville Fire units reported a structure fire in the 1900 block, describing the building as a medium-to-story structure with multiple occupants who had been evacuated. According to scanner traffic, no visible fire was observed from the exterior at that time, and an investigation was described as ongoing.
Additional Units and Scene Status
At 1:40 a.m., scanner traffic indicated a unit identified as Rockport reported a status of 10-8, while unit Z14 was noted as on scene. Additional radio traffic referenced felony command and units operating on fire channels, though the specific nature of that activity was not further detailed in scanner audio.
At 1:41 a.m., dispatchers broadcast to a unit that a resupply alarm was active and that the unit was standing by on scene. By 1:46 a.m., Rock Fire unit 1-15 broadcast a clear on air, suggesting a portion of the response had concluded or units were releasing from the scene.
No injuries were reported in scanner traffic, and no cause for the alarm or structure fire was indicated in the transmissions monitored by 608scanner.com.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

