This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Janesville firefighters responded to a structure fire at a residential high-rise building in Janesville early Tuesday morning, September 8, 2026, with the first call dispatched at approximately 5:06 a.m., according to scanner traffic.
Initial Report and Response
Scanner traffic indicated the incident began just before 5:03 a.m. when Rock County dispatch received what was described as a commercial fire alarm, with fire units being directed to respond to a location. By 5:06 a.m., Janesville Fire Department was formally dispatched to a structure fire at a residential high-rise, dispatchers reported. Initial information broadcast over the scanner indicated no evacuation was in place at the time of the call, and arriving units reported nothing showing from three sides of the building.
Units on Scene
Multiple Rock County fire units were heard responding to the scene in the minutes that followed. At approximately 5:10 a.m., scanner traffic identified unit 12-0 as being on scene, with another unit — identified as unit 13 — also checking in and confirming they were safe. The rapid check-ins suggested crews had made initial contact with the structure and were assessing conditions.
Scene Cleared Quickly
Within roughly nine minutes of units arriving, scanner traffic indicated the situation was brought under control. At approximately 5:15 a.m., a unit was heard over the radio advising dispatch to shut down the equipment, suggesting that responding apparatus was being released from the call. No injuries were mentioned at any point in the scanner traffic monitored during the incident.
Units Return to Service
In the half-hour following the initial all-clear, several units were heard wrapping up their involvement. At 5:26 a.m., one unit reported being finished and returning to service. By 5:32 a.m., scanner traffic referenced a unit returning to what was described as fire headquarters. At 5:38 a.m., a unit identified as tie-in 33 checked in with Rock County fire dispatch, and at 5:41 a.m., unit 311 was heard advising dispatch it was standing by, according to scanner traffic.
No Evacuation, No Injuries Reported
Based solely on scanner traffic monitored by 608scanner.com, no evacuation of the residential high-rise was ordered, no injuries were reported, and no investigators were heard being called to the scene. The cause of the alarm was not discussed over the scanner frequencies monitored. It remains unclear whether the initial alarm was triggered by an actual fire, smoke condition, or a false alarm, as no further detail was broadcast during the monitored period.
608scanner.com will continue to monitor Rock County public safety frequencies for any updates related to this call.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

