This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire alarm activation at a Janesville post office on the morning of July 6, 2026, prompted a multi-unit response from Janesville Fire and Rock County fire resources before dispatchers confirmed the alarm was part of a scheduled test and no fire was present.
Units Dispatched Shortly After 11 a.m.
Scanner traffic indicated that at 10:57 a.m., Janesville fire police, unit 815, and ambulance 845 were placed out of service for training. Shortly thereafter, at 11:13 a.m., Rock County dispatchers confirmed that Fire 1-4-2 was en route to the reported alarm location. At 11:27 a.m., Fire 1-4-3 was also noted in scanner traffic, followed by units 2-3 and 24 receiving a fire alarm break at 11:30 a.m., according to dispatchers.
Units Arrive On Scene
Fire 1-43 arrived on scene at 11:44 a.m., scanner traffic indicated. Just two minutes later, at 11:46 a.m., dispatchers reported that the alarm activation was the result of fire alarm testing at a post office and that there was no fire. Janesville fire units were simultaneously advised to stop responding, with scanner traffic indicating that alarm testing had been verified on site.
All-Clear Issued, Scene Cleared
At 11:48 a.m., Rock County fire units were also notified, according to scanner traffic. By 11:58 a.m., Fire 1-43 was routed to void, and scanner traffic indicated that Rock County fire unit 44s was directed to the same area. At 12:05 p.m., dispatchers confirmed that the fire alarm testing was complete and that the alarm had been reset, marking the conclusion of the response.
No Fire, No Injuries Reported
According to scanner traffic, no fire was found at the post office location and no injuries were reported during the response. The alarm activation was attributed solely to scheduled on-site testing, which was verified by personnel at the location, dispatchers noted. No investigators were reported as being called to the scene, and no additional hazards were referenced in scanner communications.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

