This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville firefighters responded to a reported fire alarm with smoke conditions at a Jackson Street address Wednesday morning, June 3, 2026, with units remaining on scene for nearly two hours before clearing the call.

Initial Report and Response

Dispatchers first logged the call at approximately 8:45 a.m. when Rocket Property Management reported an automatic fire alarm at the Jackson Street location, described in scanner traffic as connected to off-Jackson Street. Janesville Fire Department units were dispatched at 8:48 a.m. to what dispatchers characterized as an automatic residential and commercial fire alarm, with reports of second-floor smoke. Dispatchers indicated they were attempting a callback to the property at the time of dispatch.

Units on Scene

Scanner traffic confirmed multiple units were involved in the response throughout the morning. Rock County communications logged a respondent as down and on scene at approximately 8:51 a.m., with a scene designation of 26-6 noted in radio traffic, though the specific meaning of that designation was not clarified in the broadcast. Rock Fire unit 143 was referenced in scanner traffic at 9:02 a.m., and Rock Fire unit 342 was reported on scene at 9:23 a.m.

Medical Unit Dispatched

At approximately 9:36 a.m., scanner traffic indicated that Ambulance 241 had transported a patient to the hospital, though the nature or severity of any injuries was not detailed in the broadcast. It was not made clear in scanner traffic whether the transport was directly connected to the fire alarm response or represented a separate call handled concurrently.

Scene Clears

Rock Fire unit 342 was heard returning from the scene at approximately 10:01 a.m., and scanner traffic indicated the fire channel cleared the call at approximately 10:27 a.m., roughly an hour and forty minutes after Janesville Fire was first dispatched. No further units were reported responding after that transmission. The cause of the alarm and the extent of any fire or smoke damage were not addressed in scanner traffic, and no investigators were mentioned in the broadcast.

608scanner.com will continue to monitor scanner traffic for any follow-up activity related to this address.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.