This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville firefighters responded to a commercial fire alarm Wednesday afternoon, August 12, 2026, with scanner traffic indicating a busy stretch of public safety activity across Rock County beginning around 12:38 p.m.

Commercial Fire Alarm with Evacuation

According to scanner traffic, Janesville Fire was initially dispatched to a commercial fire alarm at approximately 12:38 p.m. Shortly after, at 12:40 p.m., dispatchers reported that a caller on scene had contacted 911 to report an audible alarm, but noted they did not see or smell any smoke, and there was no visible fire. By 12:41 p.m., scanner traffic indicated Janesville Fire had upgraded the call to a structure fire with an evacuation in progress, with units investigating the exterior of the building and standing by on scene.

Transfer Alarm Issued

At approximately 1:04 p.m., Rock County dispatchers issued what scanner traffic described as a transfer alarm, with communications referencing Rock Fire unit 42 and a signal transfer to another agency or station. At 1:34 p.m., scanner traffic indicated that unit 2-41 acknowledged receiving information, with dispatchers noted as passing notes to fire departments in the area.

EMS Responds to Walmart

At 1:22 p.m., scanner traffic indicated EMS units were responding to a Walmart location in the area for a possible fire. Dispatchers noted units were awaiting a report, and no further details regarding the outcome of that call were broadcast during the monitored period.

Additional Fire Activity

At approximately 2:13 p.m., Rock County scanner traffic referenced what appeared to be a special fire assignment at the intersection of Q and 2013, though the transmission was partially unclear. At 2:28 p.m., scanner traffic indicated fire units were on scene dealing with what was described as a backfire with heat present.

Welfare Check at Transit Court Apartments

At 1:47 p.m., scanner traffic indicated Janesville Fire was dispatched to a welfare check at Transit Court Apartments on Harbor Drive. Dispatchers reported that a resident had not been contacted for approximately 15 hours, and that cameras inside the apartment had detected no movement. Units were noted as responding to the location.

Late Afternoon Response to Mercyhealth

At 2:44 p.m., scanner traffic indicated Janesville Fire was responding to Mercyhealth. No further details regarding the nature of that call were broadcast during the monitored period.

Scene and Outcome Status

Scanner traffic did not confirm any injuries, confirmed fire damage, or official cause determination for any of the calls monitored during this period. No investigators were specifically announced on scene in the available transmissions. The status of all scenes remained unclear based solely on scanner traffic captured.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.