This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire in Janesville prompted a multi-unit response from Rock County and Beloit fire departments on the evening of June 27, 2026, with scanner traffic indicating at least one person was transported from the scene.
Initial Response
According to scanner traffic, Rock County dispatchers first logged fire activity at approximately 7:26 p.m., with unit N8-15 noted as en route. By 7:31 p.m., Janesville Fire Engine 8-15 reported on scene, dispatchers confirmed. A second transmission at 7:31 p.m. from Rock County fire referenced unit 15 being “on seat,” indicating crews were actively working the fire.
Additional Units Called
At 7:36 p.m., scanner traffic indicated Rock County fire dispatchers called for Ladder 131, suggesting the scope of the fire required additional aerial or ladder resources. Four minutes later, at 7:40 p.m., a unit was directed to a location described over the radio as “safe 43,” with dispatchers confirming all was okay at that position, according to scanner audio.
Mutual Aid from Beloit
At 7:50 p.m., scanner traffic indicated that unit Backfire 143 was dispatched to Beloit, suggesting a mutual aid component to the response. At 7:55 p.m., a “state alarm” was transmitted over Rock County fire channels, according to scanner audio — a designation that can reflect the escalation of a fire response, though the specific circumstances were not elaborated upon in the transcript.
Scene Status and Transport
By 8:21 p.m., scanner traffic indicated that unit Back Fire 6.1 was reported back in quarters, suggesting at least some responding units had begun clearing the scene. At 8:32 p.m., dispatchers reported that unit Fire 2-41 was transporting a patient, described in scanner traffic as “bullet” — a term that may reflect radio shorthand, though no further medical details were broadcast.
The nature and severity of any injuries were not specified in scanner traffic, and the exact address of the fire was not broadcast in the monitored transmissions. No investigators were mentioned in the scanner audio, and the cause of the fire was not discussed over the air.
Agencies Involved
Units referenced in scanner traffic included Janesville Fire Engine 8-15, Rock County fire units N8-15, Ladder 131, Backfire 143, Back Fire 6.1, and Fire 2-41, as well as coordination through the Rock County dispatcher channel and a Beloit-area frequency.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

