This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Firefighters from multiple agencies responded to a large industrial fire at Universal Recycling Technologies on Bullock Avenue in Janesville on Wednesday, July 8, 2026, with the first call coming in just before 1:00 p.m., according to scanner traffic.
Initial Report
Dispatchers first received word at 12:56 p.m. of a fire system activation at the Universal Recycling Technologies facility on Bullock Avenue. Scanner traffic indicated the initial report described a small, maintained fire near vents with no visible flames at that time. A staff member at the facility reportedly requested that responding units continue in, with dispatchers noting that an appliance in a room had led to a small fire, though whether the fire was still active was unknown at that point.
Fire Escalates to Large Industrial Blaze
By 1:00 p.m., the situation had escalated significantly. Scanner traffic indicated county dispatchers relayed to Janesville units that there was a large industrial fire with smoke showing on the interior of the Universal Recycling Technologies building. Janesville fire personnel were heard staging at the southern entrance of the facility shortly after 1:02 p.m.
Rock County fire units were directed to switch to the fireground channel for operations, scanner traffic indicated. At approximately 1:12 p.m., a request was made over scanner traffic to block traffic on Bullock Avenue from South Place to assist with scene control.
Multiple Agencies Respond
The response involved multiple Rock County fire agencies. Scanner traffic indicated Rock Fire battalion units were among those dispatched. Beloit Fire was also referenced in scanner traffic, with dispatchers noting one of Beloit’s engines was already committed to another call. A request was made at approximately 1:25 p.m. asking whether Beloit Fire should be moved to a box-level page-out. At 1:29 p.m., scanner traffic indicated the fire had been upgraded to a working fire status, with a query about whether an additional unit was needed for craft control.
At 1:35 p.m., scanner traffic indicated additional units were being shown on scene. Around 1:39 p.m., a unit identified as Z15 was reported clear, with traffic referencing Beloit Avenue command. Commands from what scanner traffic referenced as Florida Avenue command were also heard around 1:24 p.m., with personnel noting that operations were being addressed and an additional person was being paged.
Extended Operations
Scanner traffic continued through the early afternoon, with fireground communications heard as late as 2:06 p.m., suggesting an extended operational response at the facility. At 1:56 p.m., scanner traffic indicated fire personnel were requesting approach from a south straightway. No injuries were reported over scanner traffic, and no investigators were referenced in the transmissions monitored.
A separate, unrelated commercial fire alarm was also reported during the same timeframe at Seneca Housing on County Street, according to scanner traffic at 12:58 p.m. That call did not appear to be connected to the Universal Recycling Technologies fire.
The scene status at Universal Recycling Technologies had not been formally cleared as of the last scanner transmissions monitored. 608scanner.com will provide updates as additional information becomes available.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

