This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Janesville and Rock County fire units responded Monday evening to a reported structure fire on North Pine Street, with light smoke visible from the second floor of a single-family home, according to scanner traffic from July 13, 2026.

Initial Report

Dispatchers first broadcast the call at 7:44 p.m., describing a possible fire at a residence on North Pine Street in Janesville. According to scanner traffic, all occupants of the home — including pets — had already evacuated prior to firefighters’ arrival. Dispatchers noted it was too smoky to confirm visible flames, but indicated the fire appeared to be located upstairs in a bedroom.

Janesville Fire was simultaneously dispatched, with dispatchers confirming the address as North Pine Street and noting that everyone was out of the structure.

Units on Scene

A Rock County fire unit, identified in scanner traffic as 8-13, reported on scene shortly after 7:45 p.m. The unit described the structure as a two- to three-story single-family home, with light smoke showing from the second floor. Scanner traffic indicated crews were preparing to advance a line offensively and conduct a search of the interior.

Additional radio traffic around 7:50 p.m. referenced East Point, with scanner traffic suggesting fire activity was being tracked or communicated across units at that time, though transmissions were partially unclear.

Scene Operations

Scanner traffic at 8:04 p.m. included a reference to a safety drill or safety officer communication, with a unit reporting conditions at the scene. Further transmissions around 8:15 p.m. referenced smoke from the fire street and mentioned unit PG&E 13 being routed to the scene and to a main location, though portions of those transmissions were difficult to discern clearly.

At 8:16 p.m., scanner traffic indicated that Battalion 9 — identified by a battalion unit designation — was going out of service. A unit identified as 8-4 also reported fire signals at 8:17 p.m.

Scene Cleared

By approximately 8:21 p.m., scanner traffic indicated that fire units were being released and going out of service, suggesting the active phase of the incident had concluded. No injuries were reported over scanner traffic, and no mention of investigators being called to the scene was broadcast.

The cause of the fire was not discussed in scanner transmissions monitored by 608scanner.com. No additional structures were reported as affected based on available scanner traffic.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.