This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County authorities responded to a possible hit-and-run crash in the early morning hours of July 26, 2026, following reports of an erratic driver and a subsequent collision involving at least two vehicles, according to scanner traffic monitored by 608scanner.com.

Erratic Driver Reported Before 4 a.m.

Scanner traffic indicated the sequence of events began before 4:01 a.m., when dispatchers relayed a complaint of a dark-colored sedan that was unable to maintain its lane and had been observed driving on the shoulder. According to scanner traffic, the vehicle had exited near Racine, though its known direction of travel from that point was unclear in the transmission. A unit was noted as monitoring or meeting in connection with the complaint prior to the formal dispatch.

Hit-and-Run Reported at 4:01 a.m.

At 4:01 a.m., dispatchers formally broadcast a possible hit-and-run involving at least two vehicles, describing the involved parties as units not involved in the original complaint. Scanner traffic indicated a responding unit immediately requested a vehicle description from dispatch.

Units Respond Near Riverside and OWI Intersection

By 4:03 a.m., scanner traffic placed activity near the intersection of Riverside Drive and what dispatchers referenced in connection with the crash. A unit was heard reporting a vehicle coming southbound toward the Riverside area, with a second transmission referencing a vehicle approaching from a South Carolina River site location — though the precise street name was unclear in the audio. At 4:04 a.m., units acknowledged the transmission with a 10-4, and scanner traffic confirmed a 10-50, the code for a traffic crash, had been called in.

Officers Monitor Traffic Near Scene

At 4:07 a.m., a unit reported having observed approximately 30 vehicles traveling southbound on Riverside since the call was dispatched, noting that none of the vehicles appeared to be in a hurry, according to scanner traffic. No description matching the suspect vehicle was reported by that unit at that time.

Vehicle Identified, Possible Connection to Neighboring Jurisdiction

At 4:32 a.m., scanner traffic referenced a records check or renewal inquiry tied to a vehicle with a plate ending in 345, though further details were not audible in the transmission.

By 4:54 a.m., scanner traffic indicated that another agency had located a vehicle along with its driver and was inquiring whether Rock County had any hit-and-run calls in its area involving that vehicle. The Rock County unit responding stated they were not aware of a match. A second transmission at 4:54 a.m. indicated a vehicle had been traveling northbound, passing the Harlem area, though it was noted that no pursuit had been initiated by the reporting agency.

Investigation Status

As of the final scanner transmission monitored at 4:54 a.m., it remained unclear whether the vehicle located by the outside agency was definitively linked to the Rock County hit-and-run. No injuries were reported over scanner traffic, and no scene clearance was confirmed in the transmissions monitored by 608scanner.com. The investigation appeared to be ongoing across jurisdictions as of the final broadcast.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.