This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A hit-and-run traffic crash was reported in Rock County on the evening of Wednesday, June 10, 2026, with scanner traffic first indicating the incident shortly before 6:00 p.m. The crash involved multiple vehicles and prompted a continuing traffic complaint that kept units active in the area for more than 30 minutes.
Initial Crash Reports
Scanner traffic at 5:56 and 5:57 p.m. indicated a 10-50 — the standard code for a traffic crash — along with multiple additional codes suggesting an active and potentially serious scene. Dispatchers broadcast the codes 10-30, code 6, 10-24, code 8, 10-40, code 7, and code 9 in rapid succession at 5:57 p.m., according to scanner traffic, indicating a complex response was underway.
Vehicles and Location Identified
By 6:04 p.m., scanner traffic referenced a vehicle described as an Escalade. Dispatchers followed up at 6:05 p.m., advising units that a vehicle was traveling westbound on Townline Road and had sustained damage to the front end. A semi-truck was also identified as being involved in the crash, along with an additional vehicle described as a Chevy Colorado that was behind it, according to scanner traffic.
At 6:06 p.m., scanner traffic indicated units were directed to make contact regarding a subject involved in the incident, with a reference to Westknot, though details were limited in the transmission.
Continuing Complaint — White Escalade Sought
Dispatchers issued an updated broadcast at 6:09 p.m., describing the situation as a continuing traffic complaint. Units were advised to be on the lookout for a white Escalade-style vehicle with front-end damage, according to scanner traffic. The repeated references to front-end damage across multiple transmissions suggested the vehicle may have left the scene following the crash.
Hit-and-Run Confirmed Near Townline and Prairie
At 6:29 p.m., scanner traffic confirmed the incident was being treated as a hit-and-run. A unit referenced the location as near Townline Road and Prairie, according to the transmission, though the exact cross-street was not fully clear in the broadcast. The unit indicated they would handle the call from that location.
Additional Activity and Traffic Stops
At 6:18 p.m., additional 10-50 codes were broadcast, indicating ongoing crash-related activity in the area. At 6:22 p.m., dispatchers directed a unit to Henry Lane regarding a failure-to-appear associated with a vehicle, according to scanner traffic, though it was not made clear whether this was directly connected to the crash. At 6:28 p.m., a unit advised they were initiating a traffic stop, and at 6:32 p.m., scanner traffic referenced a plate or unit identifier logged as ATOM Union X-ray 9003.
Scene Status
As of the final scanner transmissions recorded at 6:32 p.m., it was not confirmed whether the scene had been fully cleared or whether the suspect vehicle had been located. The investigation appeared to be ongoing, according to scanner traffic.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

