This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A hit-and-run traffic accident involving a vehicle with deployed airbags and a juvenile driver prompted a multi-agency response across Rock County early Tuesday morning, July 21, 2026, with scanner traffic indicating the incident unfolded near North and Sixth streets beginning around 12:09 a.m.

Hit-and-Run at North and Sixth

Dispatchers broadcast a hit-and-run traffic accident at North and Sixth streets shortly after midnight, with scanner traffic indicating both vehicles involved had exited the area. According to dispatchers, units were directed to stop all exits at North and Sixth. One vehicle was described as a small four-door car with no color, make, or model immediately available, scanner traffic indicated. A second transmission noted that one vehicle had sustained airbag deployment and front-end damage, and that a subject had fled in a second vehicle.

At approximately 12:25 a.m., scanner traffic indicated the vehicle with airbag deployment and front-end damage was a Volkswagen originating from Beloit. A subsequent transmission around 1:01 a.m. referenced a white Volkswagen in connection with the incident. At 12:26 a.m., a witness at the scene advised dispatchers that a vehicle involved may have been silver in color.

Juvenile Driver Identified

At 12:17 a.m., scanner traffic indicated that the driver of one of the vehicles appeared to be a juvenile. No further details regarding the juvenile’s identity or condition were broadcast over the scanner.

Driver Reported Multiple Crashes

Around 12:29 a.m., dispatchers noted that the driver of one vehicle stated she had crashed on the other side of town before arriving at the South River crash location, scanner traffic indicated. Units were also directed to make contact with residents in the 2500 block of Riverside Drive at approximately 12:34 a.m., after scanner traffic indicated a vehicle had been driven through a yard in that area. Units were checking for damages.

Scanner traffic around 12:36 a.m. indicated there was another vehicle that had come into the area as well, though specific details were unclear from available transmissions.

Debris Reported; Scene Activity

At 12:13 a.m., dispatchers reported debris in the roadway near the crash location. Scanner traffic at 12:35 a.m. indicated a vehicle had come back to a subject, and a transmission at 12:39 a.m. referenced contact with individuals and a Wisconsin plate check in connection with a vehicle at the scene.

Additional Traffic Incidents Overnight

Prior to the hit-and-run, scanner traffic throughout the evening noted several other traffic-related calls across Rock County. At 11:16 p.m., a caller reported two people at North Village Park attempting to deploy fireworks from moving vehicles. At 11:18 p.m., Beloit Police Department was dispatched to a possible OWI involving a vehicle in the Vernal Avenue area of Beloit. At 11:50 p.m., a traffic stop was reported in Milton involving a silver SUV.

At 12:52 a.m., dispatchers broadcast a report of a subject following a vehicle near Wisconsin Avenue, describing the suspect vehicle as a black Jeep Commander. The caller reportedly attempted contact with the vehicle, according to scanner traffic.

At 12:28 a.m., Janesville was heard on scanner traffic referencing accidents at large. The full scene status of all incidents had not been confirmed as cleared at the time of available scanner transmissions.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.