This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Janesville firefighters responded to a structure fire at a food corporation facility on Conde Street Tuesday evening, after dispatchers received multiple calls reporting a forklift fire inside the building, according to scanner traffic from July 28, 2026.
Initial Report and Response
The call came in at approximately 5:49 p.m., with dispatchers indicating that Janesville Fire Department units were responding to the Conde Street location. Scanner traffic described the incident as a forklift fire inside the food corporation facility, with early reports suggesting the fire may have already been extinguished but that smoke was still present. Dispatchers noted that multiple calls had been received regarding the incident, underscoring the visible nature of the situation at the facility.
Battery Fire Concern Identified
By approximately 6:01 p.m., scanner traffic indicated that one engine had been sent to the location. Dispatchers described the fire as a battery fire — a detail consistent with a forklift fire, as many industrial forklifts are battery-powered — and scanner traffic suggested there was concern about the fire spreading or reigniting before it could be fully addressed. The specific phrasing used over the scanner indicated urgency in managing the battery fire situation before conditions worsened.
Scene Activity and Unit Communications
At approximately 6:28 p.m., scanner traffic indicated activity at the scene, though communications at that time were partially unclear. By 6:42 p.m., a unit identified over the scanner as Fire 121 was heard communicating with Rock County dispatch. The nature of that transmission was not fully audible in available scanner traffic.
Scene Status
Based on available scanner traffic, the fire was contained to the forklift and its associated battery system within the Conde Street facility. No injuries were reported over scanner frequencies, and no additional mutual aid agencies were heard being called to the scene beyond the initial Janesville Fire Department response. Scanner traffic did not indicate that any evacuation orders, road closures, or fire investigators were called to the scene during the period monitored.
The scene’s final status was not explicitly confirmed as cleared in the available scanner transcript. 608scanner.com will update this report as additional information becomes available.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

