This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A fire was reported in the Janesville area on the morning of Thursday, August 13, 2026, with scanner traffic indicating a response that included multiple Rock County fire units and a noted delay in tender staffing due to an ongoing training exercise.

Initial Report and Response

Scanner traffic first captured the incident at approximately 10:52 a.m., when Engine 211 was heard communicating with Rock County dispatch regarding a fire. At 10:53 a.m., Janesville Fire Department dispatchers broadcast a notice that training was in progress, that tender staff was unavailable, and that response times could be delayed as a result.

At 10:54 a.m., Rock County dispatch logged what was described as a track fire from unit OWI-42, according to scanner traffic. It was not immediately clear from the transcript whether this referred to a railroad track, a race track, or another type of track, and no specific address or cross-street was broadcast publicly.

Additional Units Tied Up

Scanner traffic at 11:05 a.m. indicated that unit 141 was placed out of service due to a motor vehicle accident, with Rock County fire dispatch acknowledging the unit’s status. The notation suggested that at least one fire unit was unavailable during the active response period, though no further details about the MVA were broadcast in connection with this fire call.

Alarms Clear, Further Communication Logged

By 11:17 a.m., scanner traffic brought an update indicating that alarms associated with the incident had turned themselves off. Dispatchers relayed the information as an advisory, noting it was shared simply “for info.” It was not clear from the transcript whether this referred to a structure alarm, a vehicle alarm, or another type of automated system.

At 11:23 a.m., unit 841 was heard advising Rock County dispatch that they intended to contact dispatch by phone, with the transmission indicating ongoing coordination related to the call.

Scene and Agency Status

Scanner traffic did not indicate any reported injuries, confirmed structure involvement, or a formal scene clearance during the period covered by the transcript. No investigators were reported as called to the scene based on available scanner traffic. The Janesville Fire Department’s noted training activity and resulting tender staffing shortage were the only operational limitations publicly broadcast during the response.

608scanner.com will continue to monitor Rock County public safety channels for any updates related to this incident.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.