This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Emergency crews responded to a fire-related incident in Rock County on Sunday, June 21, 2026, after scanner traffic first indicated a fire alarm shortly after 11:00 a.m. Multiple units were heard responding over the course of roughly 20 minutes before crews appeared to clear from the scene.

Alarm and Initial Response

Dispatchers reported a fire alarm at 11:03 a.m., with scanner traffic indicating the alarm had activated 31 times. The repeated activations prompted a fire response, and at 11:08 a.m., scanner traffic captured what appeared to be an emergency transmission from a unit identified as 14-4, associated with Rock County fire operations.

One minute later, at 11:09 a.m., scanner traffic indicated that a unit identified as 40-41-1 had made patient contact at what dispatchers described as a block fire. The reference to patient contact suggested that at least one individual was assessed by emergency personnel at the scene, though the nature or severity of any injuries was not made clear in the available scanner traffic.

Units Staged, Scene Activity Continues

At 11:23 a.m., scanner traffic captured a transmission indicating that fire units were ready to go and were urged to move quickly, suggesting continued activity at the scene approximately 20 minutes after the initial alarm was reported. The urgency of the transmission indicated crews remained actively engaged at that time.

Also at 11:23 a.m., a separate transmission referenced units identified as 3-4 being asked to check out at a location described as the Quarry, according to scanner traffic. It was not immediately clear from the available scanner audio whether the Quarry reference indicated a specific address, intersection, or named location within Rock County.

Scene Status

Based on the available scanner transcript, the full scope of the fire, the exact location, and any confirmed injuries or structural damage remained unclear. Scanner traffic did not indicate that investigators had been called to the scene or that any cause had been determined. It was also not clear from the transcript whether the scene had been fully cleared by the time scanner monitoring of the incident concluded at 11:23 a.m.

608scanner.com will continue to monitor this incident and update coverage as additional information becomes available through public safety channels.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.