This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Rock County fire units responded to a fire alarm in the early morning hours of Sunday, August 9, 2026, after dispatchers received a report of a working alarm near a Toppers location, with the source of the alarm unclear at the time of the initial call.

Alarm Reported Near Multiple Businesses

According to scanner traffic, the call came in at approximately 2:30 a.m. Dispatchers described a working traditional alarm at a Toppers location, but noted that the caller was uncertain whether the alarm was originating from Chili’s or Lanes — indicating the alarm may have been triggered in a shared commercial area with multiple adjacent businesses. Dispatchers were heard asking whether any available unit could respond or whether additional resources should be sent.

Units Respond

Scanner traffic at 2:31 a.m. indicated that unit 42-42 acknowledged the alarm request and was copying the call. Rock County fire unit 3-44 was among those who responded to the scene. By approximately 2:36 a.m., unit 3-44 radioed that they were good at the scene, suggesting an initial assessment had been completed, according to scanner traffic.

Scene Cleared

At approximately 2:46 a.m. — roughly 16 minutes after the initial report — scanner traffic indicated that unit 3-44 was back in quarters, suggesting the unit had cleared the scene and returned to its station. The relatively brief response time indicated no extended emergency operation was required at the location.

Additional scanner traffic at 2:54 a.m. included a transmission from unit 43-0 indicating motion, though the specific nature of that transmission was not made entirely clear in scanner audio.

No Injuries or Fire Extension Reported

Scanner traffic contained no reports of injuries, no indication of active fire, and no requests for additional fire suppression resources, medical units, or investigators. The incident appeared to have been resolved without escalation, based solely on what was broadcast over scanner audio.

The specific address of the alarm was not confirmed over scanner traffic. The cause of the alarm was not discussed in scanner transmissions, and no further details regarding damage or follow-up investigation were broadcast.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.