This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A fire alarm prompted a response from Rock County fire units in the early morning hours of Sunday, June 28, 2026, with scanner traffic first indicating the call at approximately 3:39 a.m.
Initial Response
Dispatchers broadcast a fire alarm over Rock County channels at 3:39 a.m. By 3:47 a.m., scanner traffic indicated that unit 342 had been dispatched and was en route — with transmissions referencing what appeared to be Mercy, though the exact destination was not fully clear from the broadcast.
At 3:48 a.m., a transmission indicated that the call was described as a “final” alarm in Rome, scanner traffic indicated, suggesting the incident was located in the Rome area of Rock County.
Units at Scene
Unit 342 was the primary unit identified in scanner communications throughout the incident. At 4:04 a.m., scanner traffic referenced a cross-fire location at 342 and Afton Street, according to dispatchers, indicating the unit’s positioning at or near that intersection during the response.
No additional units were identified by name or number in the scanner transcript. Scanner traffic did not indicate whether mutual aid from neighboring departments was requested or deployed.
Scene Cleared
At 4:19 a.m., scanner traffic indicated that unit 342 was returning, suggesting the unit had cleared the scene approximately 40 minutes after the initial alarm was broadcast. No additional units were heard remaining on scene following that transmission.
Scanner traffic did not include any reports of injuries, structural damage, or civilian displacement. No fire investigators or additional personnel were referenced in the transmissions. The cause of the alarm was not discussed over scanner channels, and no further details about the nature of the fire were broadcast.
No Further Details Available
Based solely on available scanner traffic, the incident appeared to be resolved within roughly 40 minutes of the initial dispatch. Whether the alarm was triggered by an actual fire, a mechanical malfunction, or another cause was not indicated in any scanner transmission. Authorities had not released a public statement regarding the incident as of the time of this report.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

